Glueing 8/4 Walnut to 4/4 Maple
Mark Goodall - ATL - tooljunkie
>I'm building a Foosball/Soccer table. I figured I'd go all out and, like all other projects, spend more than if I just went out and bought a premade one at Sports Authority.
It's basically a fancy box 4-sided, sort of like a waterbed frame. I'm using 8/4 walnut, with hard maple highlights. The sides will be be glued up slabs roughly 50" x 20" x 2".
I can't seem to find any 8/4 hard maple (got plenty of 8/4 walnut and 8/4 soft maple, but only 4/4 hard maple) so I thought I'd simply rip some 2" wide strips of maple and sandwich them in with the walnut for the glue-up.
Think of some wide walnut with a few white "racing stripes" running down the middle.
Anyone see any problems doing this? How about the glue... just use Titebond II ? Am I looking a problems with shrinking, cracking or anything like that if sticking the maple between the walnut like that? Or should I just keep it all walnut?
I'm not completely set on the maple stripes idea. I wasn't going to at first, and then though since I'll be gluing up a 20" wide slab, that I could be cool looking with stripes, but I won't if it's going to cause trouble later.
Yes, I'm building a heirloom (hopefully) table soccer game that will weigh as much as a small car :) I've got to build something strong enough to survive the future 180-200 pound teenage boys (my son and his friends in 7 years) using it.
Happy Woodworking!




