>I took a photo to an engineer and he loaded it into a CAD program ($$$$) along with the height of the piece and in minutes he produced dimensions of all the critical parts as well as a 1:1 scale print of the curved apron and foot.
Is there something I can buy for less than $$$$ that will do these tasks?
This months issue of FWW has an article that hits the basics of Sketch-up, if you get the magazine. Otherwise you can download the free version from Google. Just Google "Sketch-up", and you should have no problem finding it. BTW- the professional version is a little spendy ($495), so don't just buy it without first trying the free download. It will likely do everything you need it to do, anyway.
>I have read your responses but I am left unsure of the answers. I don't want to invest a lot of time poking into some computer program only to find out it will not do what I need to do. I find messing with software painful and only do it when faced with great need and a certain outcome.
The need: Download picture into software along with one of more known dimensions (say height or width) and by mousing around get dimensions of other features, for example drawer height, and be able to print 1:1 copies of features like the curve of a skirt or a foot flair.
Do you know for sure that Sketch-up can do these tasks? I am looking for a guarantee from someone that does it.
>Bill, go on over to familing woodworking and ask Dave Richards. He will know. Post under the Design forum. Dave is a SketchUp guru, and friendly as a puppy. Tell him I say "hey."
familywoodworking.org.
You have to register to post but it worth it. A nice forum like this one, only with fewer members.
>No guarantees, but the image is an example of doing this in SketchUp. I usually do this in AutoCAD, but this is pretty simple. You will need to spend a little time getting familiar with the program. Here in a nutshell is what I did:
Set the program for a 2 dimensional, parallel projection view (this may sound like Greek to you, but others using the program might find this handy)
Under the file menu I selected import, then navigated to the photo I wanted.
The program will let you scale the photo on the way in, but I wait and scale as a separate step. That lets me measure the photo on screen and figure out how big it needs to be.
In SketchUp is a tool called "Tape Measure" that unfortunately disappears when I did a screen capture. With it you simply click from point to point to get the numbers you need.
>If he should walk in I would give him a hug. By comparison it must be joy for others to discover how easy it is to deal with WoodCentral. I spent 20 min answering various questions on the "family channel", waiting for email confirmation and then when all was said and done I still can't post the question of Dave or get his email to ask it directly.