>Can someone provide some expertise as to which privides more useable BANG FOR THE BUCK?
Only difference is thickness that I can tell, but I do not think I will work 1.5" thick material with DT's.
I Like Leigh Equipment, and am interested in a 24" jig, am ready to buy, -----But now wonder if the less expensive jig is better (price wise) overall. I have no idea how either one performs..... Extra templates, etc.... Looks like you could spend a ton with all the EXTRAS YOU need to purchase.
The Super jigs give you the advantage to rout half blind joints in a single pass while the D4R does not. The D4R will let you make more esoteric joints, plus make some morise and tenon connections, but if you want to crank out "single pass, fixed, half blinds" then the Super jig will give you more bang for your buck.
Check out this link on the Leigh site for a spec by spec comparison.
>Greg, I just ordered and received my new Super 24" Jig. So it's still too new to know from experience. However, in talking to a friend that has the D4, he didn't like the idea of all the plastic in the new Super jig and his model can cut dovetails in thicker stock.
That said, I went on the advise of Glen Huey. We talked about the jigs while he was here at the WoodWorks show. His exact words were, the new Super Jigs delivered "more bang for the buck".
I've got mine assembled but not adjusted yet. I ordered mine from Woodworker's Supply because I had almost enough "Rewards Points" accumulated on my Visa to pay for it. Since Woodcraft currently has the 24" Super Jig and Accessory Kit combo for $399, I asked if they would match the price. Once they checked the pricing on-line, they were happy to do the match and they had the accessory kit in stock - Woodcraft's are back ordered.
I just cut the last dovetails with my old PC 12" jig this weekend and it will be going into retirement now. Can't wait to setup and experiment with the new Leigh jig.