Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

spice box *LINK*

Posts

Re: spice box *LINK*

#5

Re: spice box pic 4

Mike Baker

>Case is raw wood .

Trying to figure out what may be the best finish.

It was a fun project.

Mike

Re: spice box *LINK*

#6

Re: spice box

Dan Donaldson

>Very nice. Looking forward to seeing it with the finish. What are the dimensions?

Re: spice box *LINK*

#7

Shellac

Bill Tindall, E.TN

>Nice box. Might as well finish it in the period with shellac.

Re: spice box *LINK*

#8

Re: Shellac

Mike Baker

>Bill

Thanks!

I have never finished with shellac.

The projects I've seen that are finished with shellack are beautiful

Is it a hard finish to apply?

Can you use the premixed version (Bullseye) or are the flakes the way to go?

Mixing stuff like this always intimidates me.

Mike

Re: spice box *LINK*

#9

Re: spice box

lee beeden

>Very nice indeed! I have also wanted to build a spice cupboard. Nice dovetails by the wayl

Lee

Re: spice box *LINK*

#10

Re: spice box

paul waddle

>That crown panel-was it cut on a shaper? Looks like the reveal is too much for a router. Nice workmanship,now lets see the inside.. pw

Re: spice box *LINK*

#11

Re: Shellac

Glenn Madsen near San Francisco

>I'm not Bill, but I'm a shellac convert. Amen!

For a beginner, go to the hardware store, and get some Zinnser SealCoat, and a can of Denatured Alcohol. In other countries, it's often called something else, but it's the solvent for shellac. Put the Sealcoat in a squeeze bottle, and add maybe 50% of that volume of DNA, and shake well. Now squirt that on a lint-free old tshirt scrap, and wipe it on a scrap piece, gently. It dries in about three minutes, and you can do it again. You can wipe on maybe three coats, before you need to let it cure for several hours, or overnight. Repeat this until the finsh seems good to you, and rub it with burlap, steel wool or white synthetic abrasive pad, dipped in paste wax. Let that dry, and rub it with a clean soft cloth until it glows. It's really hard to screw up.

Now do your project, with confidence.

You can mix your own from flake, and use different colors, dyes, and the like. But to start, Sealcoat works really well, and you don't have to buy three years supply to get started.

Re: spice box *LINK*

#12

JL

Re: Nice looking. For actual use?

JL

>If it's going to be used for spices, use lots of shellac on the interior of the drawers. Very pretty.

Re: spice box *LINK*

#13

alternate application

Bill Tindall, E.TN

>I struggled with how to get even coats of shellac on something. I never was successful with a brush as I never found one that held enough finish. You do not want to run dry in the midst of applying a line of finish and keep a wet edge.

A spray gun works nicely if you have one. but I normally use a pad prepared by wrapping some absorbent cotton, like tee shirt material, around a ball of wool. The wool ball, when compressed by the outer rag covering, can be about the size of a ping pong ball or a bit larger. The wool holds a huge amount of liquid and that is its advantage. Use dilute shellac, like about 1 to 1.5 pound. Many thin layers do better. Screw ups are easily sanded back smooth again.

And as always with finishing- don't practice on your piece.

Re: spice box *LINK*

#14

Re: Shellac

Mike Baker

>Thanks Bill and Glen for the advice . I will go get som Zinnser and give it a try.

I have a decent spray gun. (will practice on scrap)

I will try both spraying and pad application.

I normally use very thin coats of Spar Urathane thinned with mineral spirits. Many many coats, and then rub out with rottenstone and a mixture of Kerosene, Automatic Transmission fluid, Mineral sprits.

I have had good success with that.

Re: spice box *LINK*

#15

Re: Nice looking. For actual use?

Mike Baker

>The dimensions of the cabinet are 15 x 18 tall x 10 deep. These dimensions are measured over the moldings .

The case measures 13 3/8 x 9 deep x 15 tall.

All moldings, top, base, style, rail, and arched panel, were done on a router table.

There is a view of the inside with picture #2 I believe.

Thank you all for your responses.

Mike

Re: spice box *LINK*

#16

Re: alternate application

Steve Schoene

>I've gone the other way with brushes--using a watercolor wash brush with Taklon Gold bristles--similar to flat sable brushes. Very little reservoir. But it lays down a very thin, very smooth coating so that picking up and restarting the brush leaves virtual unnoticable texture. You still need to work quickly with no do-overs.