Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Stacking dust collectors?

Posts

Stacking dust collectors?

#1

Stacking dust collectors?

Gary Evans Tallassee, TN

>Hi all,

I'm still working on the design for my DC system, but basically, I will have a single run of 6" diameter PVC pipe, 33' long, in the basement of my shop, into which I will drop 6" pipes from a lathe on one end, then a radial arm saw, band saw, belt/disc sander, 12" CMS, 6" jointer, 12" planer and then a 10"table saw at the end where the DC will sit. Location of the DC is next to the outside basement wall where I can blow the dust outside.

Turns out I have a 1HP Craftsman DC in addition to the 2HP generic 2 bag DC that I am using as the basis for this system.

I'm wondering if I can put the Craftsman in line at the end of the 33' duct and then run that straight through the 2HP unit to the outside.

Anybody know of the negative/positives of stacking one DC in front of the other?

Thanks,

Gary

Re: Stacking dust collectors?

#2

I seem to recall someone from the old badger Pond

Don Henthorn Kyle, Texas

>tryong this and he found that it did indeed increase performance. Probably there are others who will remember more clearly. I am presently suffering from CRS and don't trust myself.

Re: Stacking dust collectors?

#3

JL

Re: Noise?

JL

>Noise might be one negative.

Re: Stacking dust collectors?

#4

Re: Stacking dust collectors?

John Dillbeck

>You are right and it was Jim Halbert. He ran exhaustive test on two blowers and found that a series hookup was best. I have seen his setup and he has both units outside.I don't remember the cfm numbers but he had two 2hp units with 13in impellers.

Re: Stacking dust collectors?

#5

Re: Stacked dust collectors!

Mark Mandell - Gone Round In Jersey

>Did he also have hand grips and safety lines?

How about mag-lok shoes?

Wouldn't it be easier to just build a shop in a wind tunnel? Like, no ductwork to worry about, a couple of ear plugs, and a safety net to catch s---- before it hit the fan, and you're cool. No?

[I do remember Jim from the Pond. How's he doin']

Re: Stacking dust collectors?

#6

Re: Noise?

Gary Evans Tallassee, TN

>Hi Jerome,

Both of these will be in the basement, so noise is not as much of a consideration. It seems like this might be a good way to go, but I thought I would ask before I spent the time and money to hook it up that way.

Gary

Re: Stacking dust collectors?

#7

Re: Stacking dust collectors?

Gary Evans Tallassee, TN

>Thanks Jim,

That is one of my concerns. One of my units has somewhat less flow than the other, but I thought I might negate that by putting the small one closer to the tools.

Gary

Re: Stacking dust collectors?

#8

Re: Stacked dust collectors!

Gary Evans Tallassee, TN

>Hey Mark,

According to everything I'm reading, max airflow is the ticket. I'm just trying to figure out how to generate that with the least possible investment.

Gary

Re: Stacking dust collectors?

#9

Air

Mark Mandell - Gone Round In Jersey

>Hi Gary,

You are correct; it's CFM that gets the dust moved. Of course hurricanes work on the same principal |;-}}}.

I just re-did my system with 6" ducting, resetting my old 2hp blower, and putting on a 6 foot filter bag. Easily doubled (if not tripled) the CFM.

Moves so much air, now I'm getting complaints about the noise.

Before, I got complaints about the dust.

Can't possibly win.

But at least the shop is clean. |;-}

mm