Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Best and Worst Woodworking Xmas present

Posts

Best and Worst Woodworking Xmas present

#1

JL

Best and Worst Woodworking Xmas present

JL

>Sort of an impromptu survey.

The best - the LOML gave me a complete set of LV spokeshaves one Xmas. She saw them in the catalog and snatched the catalog away from me.

The worst - that's a tough one - my ex-boss was always giving cheapo tools like multi-tipped screwdrivers and the like. They weren't really bad, just "inexpensive". My parents gave me a Craftsman 0.5 amp 3D sander one Xmas - but the jury is still out on that. There have been tools that I haven't really liked (or used) - but no really horrible ones.

Thank goodness for the LV wish list and catalogs where you can circle things :).

Re: Best and Worst Woodworking Xmas present

#2

Re: I've given the multi-tip screw drivers before

Peter Gregory

>I bought 40 of them and gave them to everyone who worked for me one year. They kept "borrowing" my tools to work on their computers, so it was solving a problem. It was pretty popular. Cheap tools have their place, every socket set I own is super cheap.

My wife gave me a get of jail free card on my Felder saw/shaper last year, had to be my best X-mas present.

Re: Best and Worst Woodworking Xmas present

#3

Re: Best and Worst Woodworking Xmas present

Thomas S Stockton

>I had a boss who gave us all business cards instead of a christmas bonus telling us if we had more sales there would have been bonus' and we should give cards to everybody we meet. The only problem was we weren't the sales staff he was we just made the stuff. It was pretty insulting the way it was handled would have been better to just say we had a down year and can't afford a bonus.

Best present my folks got me a lathe when i was about 16 for christmas

Tom

Re: Best and Worst Woodworking Xmas present

#4

Re: Best and Worst Woodworking Xmas present

George@Colonel's Workshop-Havertown PA

>Good Afternoon JL,

The best X-mas present I received had to be the DW 773 planer, which most of my older kids funded from after school jobs and paper routes. The effort was far more pleasing than the planer, although I really needed one. The worst was one of those in-line P+C Profile Sander, which I've used three times in 9 years.

The story behind the profile sander explains my kids' choice. Three of them went shopping for me at Home Depot. None knew the others were there until they all met unexpectedly in the tool corral. They decided the profile sander was the one tool I didn't have, and that drove their decision.

George

Re: Best and Worst Woodworking Xmas present

#5

Re: Best and Worst Woodworking Xmas present

Bill White

>B & D battery powered tape measure. What a joke.

Bill

Re: Best and Worst Woodworking Xmas present

#6

Re: Best and Worst Woodworking Xmas present

Verne in NJ

>I hate to admit it, but I get a chuckle out of my battery-powered B&D tape measure every time I use it.

It's so silly - like a pet rock or something. I kind of like it.

Re: Best and Worst Woodworking Xmas present

#7

Alan Young

Gee I was going to send one of these to

Alan Young

>everyone on my list.


Alan

Re: Best and Worst Woodworking Xmas present

#8

Re: Best and Worst Woodworking Xmas present

Ken Oakley-Sunny St. Cloud, Fla.

>My best Christmas present was my discharge papers from the U.S. Army at 2:30 PM, December 24, 1954 after returning from 14 months in Korea. Second best has to be having Louis Armstrong, his band, and Dinah Washington, putting on a 3 hour show at the US army Hospital in Kyoto, Japan on Christmas day 1953 where I was recovering from hepititas.

I really have never had a worst Christmas present. Just some treasured more than others.

Re: Best and Worst Woodworking Xmas present

#9

Re: Best and Worst Woodworking Xmas present

Lee Ohmart

>I'd have to say the best so far would be my General Mortiser. Unlike all the others, this was my first special purpose tool. The "worst" is tough. I can make use of almost anything and try to concentrate on and appreciate the thought with any gift. It's just the way I was brought up. I've had gifts flung in my face when the receiver didn't feel that they measured up and it's a real downer.

Re: Best and Worst Woodworking Xmas present

#10

Re: Best and Worst Woodworking Xmas present

Paul Woolson

>Like George, I get some duds now and then. My family, mostly my in-laws, go to Home Depot or the like and look around to find the tool that I don't have. Well, in most cases there's a reason I don't have it.

This might be sappy but my favorite gifts are pictures drawn by by kids.

Re: Best and Worst Woodworking Xmas present

#11

Jim DeLaney, Austintown, Ohio

Re: Gee I was going to send one of these to

Jim DeLaney, Austintown, Ohio

>Ahh, you got the Grizzly Email, too, huh?

Jim D.

Re: Best and Worst Woodworking Xmas present

#12

Re: Best and Worst Woodworking Xmas present

Larry Clinton

>I think the worst was the knitted brown scarf my SIL made for me when I was about 9 years old. I never, ever bought clothes for any child for Christmas. Think the one I really enjoyed at the time was an attachment for my drill that drove a 4" circular saw. This was in the late 40's or very early 50's. I was about 10 or 11 and I didn't own a decent saw of any kind.

Re: Best and Worst Woodworking Xmas present

#13

Re: Thats funny George

Larry Clinton

>I have a Dremel profile sander and use it a lot. I just bought 3 rolls of adhesive backed paper for it from Klingspoor. I use it mainly to sand the edges of raised panels. It lets me keep a sharp edge on the face and really cuts the labor on the end grain sanding after the router. I go to 320 grit there so it stains like the rest of the panel. The Lafayette, IN Homier has some refurbished PC's (single speed) for $30. I am helping build a cabinet for a friend that will straddle his toilet. He already had the 4 oak doors being used and they are really full of tool marks. He used my Dremel and was going over to Homier today to buy one of the PC's. Guess you either like or hate them.

Re: Best and Worst Woodworking Xmas present

#14

Re: Best and Worst Woodworking Xmas present

Stuart Hough

>I always told the family that I NEEDED to be present for tool purchases, and for the most part they listened. I got gift cards, mostly, and that worked out just fine. The worst ( for 5 minutes ) was the B & D powered C-clamp. Then my wife told me that was the "gag gift". What a relief.

Re: Best and Worst Woodworking Xmas present

#15

2x4 Furniture book!

Dominic Greco in Richboro PA

>One year my SIL gave me a book entitled "2x4 furniture". I think the name says it all. I couldn't even burn the book for fear of the fumes polluting the atmosphere for years to come! I think I eventually just donated if along with some other books to the Purple Heart.

My best gift was a LV LA Smooth plane that my daughter and wife got me last year.

See ya around,

Dominic

Re: Best and Worst Woodworking Xmas present

#16

B&D should read this thread.....

Barry Irby

>Along with the battery powered tape and C clamp mentioned above, I will add the battery power adjustable wrench I got last Christmas. (Are you reading this, B&D market research?) I took it back to Lowes and traded it in against a Hitachi rechargeable screwdriver. It was $80 and I never would have paid that much for it had it not been for the wrench to "throw in on the deal". Turns out that is a bigger piece of crap than the wrench. Already sent it back for a replacement (the clutch failed) and its a hateful turd to carry around. So that gift turned out to be a double gotcha.

Another bad gift was a spectacular turning blank blank a lady friend gave me so I could make her a bowl. I guess I was privileged to turn it, but it would have been nice to keep it too. Later she gave it to a boy friend that somehow came between us. Wonder if he knows I made the bowl? Actually, I signed it, but wonder if he knows I was a boyfriend? Wonder if she knew she was going to give him the bowl all along? A bowl with issues. Glad I cored it. Wonder if she knows the three smaller cores were actually better wood? Hmm. No wonder I have never finished turning the cores?

My kids lost my favorite hammer that my Dad had given me before he died. They asked what I wanted for Christmas. How about an identical hammer? My soon to be X wife got them a $2 Chinese knock off to give me. It was the thing that told me she was serious about the divorce.

My best gifts were gift cards. I take them to the store and buy something I actaully want and "attach" the gift to the giver. Sorry I got into this. What a sad little life I have. I need to find some better frineds with better gift giving skills.

Re: Best and Worst Woodworking Xmas present

#17

Re: Best and Worst Woodworking Xmas present

Ed O'Neill

>When first married my wife was teasing me about what she had gotten me for Christmas. I turned to my 18 month daughter sitting in her high chair and asked her what Mommy bought me for Christmas. Without hesitation she blurted out its round with little pointy things. A new 40 tooth carbide blade. The look on my wife's face was priceless. We still laugh about it. The funny thing is that at 36 years old no one tells my daughter secrets because she still cant keep them. Still the best Christmas present. My vote for the worst is the Ryobi detail sander, its still in the box. Ed

Re: Best and Worst Woodworking Xmas present

#18

Hey, wait a minute.....

Mark Goodall - ATL - tooljunkie

>I saw that book at the library and made this with 2x4's :)




Re: Best and Worst Woodworking Xmas present

#19

Re: B&D should read this thread.....

Bruce, a MN galoot

>Barry says: "What a sad little life I have. I need to find some better frineds with better gift giving skills."

Gee, and the worst I ever got was a set of POS clamps from my sister. At least she meant well. I never got a tool that was a hint like yours. :-)

Bruce

Re: Best and Worst Woodworking Xmas present

#20

Re: Best and Worst Woodworking Xmas present

Thomas S Stockton

>I had one of those ryobi detail sanders took it to a woodworkers meeting and couldn't give it away.

Tom

Re: Best and Worst Woodworking Xmas present

#21

Re: Gee I was going to send one of these to

Rob Stokes in North Vancouver

>LOL!!

I actually have TWO of those - according to SWMBO they work OK as regular coffeee cups but shame on me - I actually washed them (a no-no) and I have no idea where the cords are..

Rob

Re: Best and Worst Woodworking Xmas present

#22

Re: Best ever

Moses Yoder in White Pigeon, MI

>I had the Lee Valley catalog laying around when the back cover showed the shoulder planes; I think there were only 2 at the time. My wife must have seen me ogling them. The medium shoulder plane is probably my most cherished tool in the shop. Something about the way it looks and feels just trips my trigger.