Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Grizzly G0441 Cyclone Dust Colletor Install *LINK*

Posts

Grizzly G0441 Cyclone Dust Colletor Install *LINK*

#1

Grizzly G0441 Cyclone Dust Colletor Install  *LINK*

Bartee ( Metro Atlanta )

>Well, I finally got to it. Don't try this with a good helper.

This took about 6 Hours on Saturday and about 9 hours on Sunday.

The unit is excellent. Fit and Finish is very good and everything aligned as it should. The measurements in the install manual are right on.

Please let me know if you have any questions.

You can slow down or stop the slides just roll your cursor over the picture




Web Picture album

Re: Grizzly G0441 Cyclone Dust Colletor Install *LINK*

#2

Re: Grizzly G0441 Cyclone Dust Colletor Install

Jeffrey D. Rose

>Great slideshow. Does the Grizzly do a good job on seperating the dust? I have a barrel top collector and would like to move up to a cyclone, so keep us posted of your experiance with it.

Thanks,

Jeff in Iowa.

Re: Grizzly G0441 Cyclone Dust Colletor Install *LINK*

#3

JL

Re: Nice pics

JL

>I'm glad you had a good installation. Now for the tough part - the ductwork. Hopefully that will go quickly and uneventfully.

PS - If your cats are anything like mine, the minute the cyclone starts - they're out of the shop! Well - most of them anyway. They don't mind the lathe though.

Re: Grizzly G0441 Cyclone Dust Colletor Install *LINK*

#4

Duct Work....

Bartee ( Metro Atlanta )

>I am planning the ductwork now... I should have included the picture of all the pieces that I have accumulated for the duct.

I am going with 6" sewer pipe. I have been able to find all of the parts at 3 different Lowe's. HD does not carry 6".

I will be doing a very complete picture album of the Piping..

Re: Grizzly G0441 Cyclone Dust Colletor Install *LINK*

#5

Re: Grizzly G0441 Cyclone Dust Colletor Install

Larry Clinton

>I have had my G0441 installed for over a year now. It does an excellent job. The only issues I have is remembering to empty it! I have overflowed into the Cartridge 3 times. Doesn't appear to have caused any problems though, I just have to do some cleaning. The brush cleaner does a good job cleaning the cartridge filter. Grizzly sent out a retrofit kit to install a new brush about 6 months after I installed my unit. I have one of the first they delivered. I would buy it again. I have my shop piped with 6" S&D. The run to the 20" jointer is about 40' with an additional 10' of 6" flex. It has no problem picking up all the dust & shaving from it even with the gate to my Unisaw saw open. I have an 8" jointer with about 35' of 6" and 10" of 4" flex attached - it also works well. I do try to keep either the planer or jointer gate closed - The system is marginal with both of them and either the Unisaw or band saw gate open. I can get by running the joiner and planer at the same time if everything else is sealed.

Re: Grizzly G0441 Cyclone Dust Colletor Install *LINK*

#6

Duct Work...

Bartee ( Metro Atlanta )

>Larry sounds great. I am sure I will not be disappointed.

Good to hear about two machines at a time.

It would be great to see some pictures of the duct work.

I have all of the pieces of my duct work gathered except the actual 6" and 4" pipe. I have gotten everything at Lowes.

I am looking for a 8" to 6" rubber sewer pipe adapter.

I am really busy for the next week so I cannot get back to it.

I will be posting a complete album of that also.