Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

How to make brass fittings a different color *LINK*

Posts

How to make brass fittings a different color *LINK*

#1

How to make brass fittings a different color *LINK*

Peter Gregory

>I asked here a few days ago about how to find decorative screws in oil rubbed bronze finish. After a bit of research, this is what I came up with. Jax has been making chemical mixes to change metal colors for 40 years, so I'm trying their mix to change brass to a black/brown color. I included the webpage for your viewing enjoyment.


http://www.jaxchemical.com/jaxshop/shopexd.asp?id=41

Re: How to make brass fittings a different color *LINK*

#2

sorry I missed your earlier post *LINK*

Keith Newton

>If you want some other options for metal patina products, here is another source for probably more options than you want, but maybe you will find something that you never would have thought to ask.

I am not sure what in in the product they you linked to, but I have used nitric-acid for this. You can find it where stained glass supplies are sold if you have one near. I am sure you noticed the hazardous shipping note.


http://www.sculpt.com/

Re: How to make brass fittings a different color *LINK*

#3

Re: Saved a couple of bucks going direct

Peter Gregory

>The internet makes it too easy to comparison shop. Thanks, I looked over that website. Once I was on the scent, it was fairly easy to see all the details.