Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

using leftover waterbased poly

Posts

using leftover waterbased poly

#1

using leftover waterbased poly

DizD

>Had a pint or so in a gallon can last used about a year ago and when opened, it appeared thicker than normal. I understand there are problems with thinning water based poly, but what about thicknening?

Would use this for shop project so appearance is not critical. I recently bartered some log run walnut for two old Delta Rockwell lathes ( circa 1953)and will be putting one together to use. I have cleaned up the wooden bottom shelf and planned on using this for a finish.

Re: using leftover waterbased poly

#2

Re: using leftover waterbased poly

Lee Schierer - McKean, PA

>I've used old finish with no problems. Depending upon how thick yoursw is I wouldn't recoomend it for a heirloom piece, but work in teh shop should not be a problem.

Lee