Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Question on sharpening prices

Posts

Question on sharpening prices

#1

Question on sharpening prices

Kelby

>I took my jointer knives (3 knives, each 12" long) to Woodcraft to have them sharpened. (They have a pickup there for an outside sharpening guy who picks up every day.) They are HSS. The charge was about $45, which works out to a little over $1.25 an inch. Is this a reasonable price for sharpening HSS jointer knives? If not, can anyone recommend a place to mail them to (or in Orange County, CA) that has good prices?

Re: Question on sharpening prices

#2

Dale Lenz

Re: Question on sharpening prices

Dale Lenz

>Just talked w/ my sharpen guy over planer knives, $0.30/in. Sorry we are in Okla.

Re: Question on sharpening prices

#3

Yikes!!!

Bill Tindall, E.TN

>that is what I pay for new knives.

I use Misenheimer, Morristown TN. 423 587 4300

They manufacture tooling for the wood working industry. I figure if they are smart enough to make it, they are smart enough to sharpen.

Re: Question on sharpening prices

#4

Re: Question on sharpening prices

Larry Marker in Alabama

>Scott Whiting in Arizona is a member here and a old time Ponder. A number of folks here have used him and have said that they were happy with his work and his prices. I have bought new stuff from him, but I haven't used him for sharpening.

Give him a call at 1-800-594-7262 or email him at

scottsharpaz@qwest.net

Larry

Re: Question on sharpening prices

#5

Bart Goldberg

Re: Question on sharpening prices

Bart Goldberg

>Thats at outrageous price for sharpening. You can get a brand new set for that price.

Bart

Re: Question on sharpening prices

#6

Re: Question on sharpening prices

Barry Irby

>I sharpen my own. Jointer knives are 6" but I also do my planer knives and they are 12". I do it on a 6" grinder with an attachment on it that allows a micrometer adjustment. This is nothing more than a "slider" on it that allows you to advance the knife toward the stone with a screw. It was sold by Delta as a way to do chisels and plane irons. The slider only moves about three inches left to right, but I clamp a steel rule into it and just slide the knives by past the stone.

Really doesn't take long. I sharpen both pairs of my planer knives at the same time and it takes about thirty minutes. That's less time than it takes to haul them to and form the Woodcraft store. I have a white stone on the grinder.

Re: Question on sharpening prices

#7

Re: Question on sharpening prices

Ralph Turney

>What about sharpening carbide jointer blades(also in the OC)? Can they be sharpened with the regular stones that come with the Makita 9820-2 horizontal wheel sharpener or do you need diamonds???

Re: Question on sharpening prices

#8

Re: Carbide needs diamond for effective sharpening

Al Crandall

>

Re: Question on sharpening prices

#9

Re: Question on sharpening prices *LINK*

Jim Dillon

>Kelby,

That price does seem high if it doesn't include shipping. Sometimes shipping costs by some vendors can be unreasonably IMO high. I purchased a backup set of Freud 8-inch jointer blades from Amazon and got free shipping for less than $25 IIRC. Here is a link to Amazon's Freud jointer knives web page which gives you an idea of the costs for new blades, although not the 12-inch length. Maybe another vendor on Amazon's site has the 12-incher. Sometimes Freud offers promotions like buy 4 for the price of 3 etc. Hope this puts a little perspective on your sharpening price.

Jim


Freud Jointer Knives

Re: Question on sharpening prices

#10

Re: Question on sharpening prices

Ron In Sterling CT

>Scott has sharpened jointer knives, planer knives, and saw blades for me. He does an excellent job at competitive prices. No affilliation, just a satisfied customer.

Re: Question on sharpening prices

#11

Re: Question on sharpening prices

Kelby

>Thanks, everyone! The Woodcraft price seemed very high, although I didn't think about it until I was on my way home. I'll try a different route next time.

Re: Question on sharpening prices

#12

Is Woodcraft getting a cut?

Forrest Addy

>Is Woodcraft getting a cut (so to speak)? If so you can find the local guy and work directly with him. Call around to local sharpening services.

You get a better price per unit if you have several sets to sharpen. I keep three sets on jointer knives in rotation. When I put the last set on I take the two dull sets, planer knoves, table saw blades, hand saws, saw chains, etc out to the saw shop. The bill is usually a couple hundred but I amortise it over a two or three years.

I try to time my visit for the after lunch rush so I can meet and greet others in the woodworking racket. Maintaining contacts with the local experts leads me to all kinds of benefits machinery coming up for sale, lumber, specialty work etc. Its not uncommon for a visit to the saw shop to lead into enough work to pay for the sharpening.

Re: Question on sharpening prices

#13

Re: Question on sharpening prices

Thomas S Stockton

>You might want to post your location and thereis probably somebody who can give a recomendation of a shop close to you. There was a long thread on the finewoodworking site about local sharpening shops people trusted might be a start.

Tom

Re: Question on sharpening prices

#14

Re: Question on sharpening prices

David G. Sparks

>I use cobalt double-edge disposable blades from Esta U.S.A.. Initial cost is high because you have to buy the blade holders as well as the blades the first time, but the blades last a long, long time.