Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

I need some advice on a pin nailer

Posts

I need some advice on a pin nailer

#1

I need some advice on a pin nailer

doug f, san clemente, ca

>I find myself in the market for a pin nailer for a number of slender and delicate moldings. It seems like the small nail would be useful for other projects as well. Looking at Senco, PC, and Grex.

Comments or suggestions would be most welcome.

Thanks.

Doug

Re: I need some advice on a pin nailer

#2

Re: I need some advice on a pin nailer

George@Colonel's Workshop-Havertown PA

>Hello Doug,

I have an older Senco which my son gave me and also a machine from Harbor Freight. Both shoot well and feel good. My #3 son replaced the Senco with a P+C. I think they all will do a good job. Take your pick and be happy.

George

Re: I need some advice on a pin nailer

#3

Re: I need some advice on a pin nailer

David Yoho

>Doug, I just bought the Grex 645L. I found my best deal at The Fastener Company.com. I chose this model for the range of headless pin sizes it accepts and the trigger lock. I've been impressed with this tool and highly recommend it.

David

Re: I need some advice on a pin nailer

#4

Re: I need some advice on a pin nailer

NickB

>I have a Cadex that shoots 1 3/8", which I believe is built on the same basic chassis as the Grex (Cadex, Grex and Max came out tops in the last review I read in JLC-July 2006). Not a single issue with the Cadex in the time I've owned it (that said, I've probably only shot a few hundred pins so far).

The advice in the review was to get something that goes to 1 3/8" pins (last I looked Senco and PC were limited to 1"). The other things in favor of the Grex are a belt hook (I find I use it all the time as I move around a work piece), and easy clearing of jams (haven't had one yet, but the Senco takes a lot more work to clear a jam). One other one you might want to look at is the Bostitch-the JLC picked that as what to buy if money was tight (the Grex, Cadex, and Max are in the $200 range, the Bostitch is closer to $100). The Bostitch goes to 1 3/16" pins.

Hope this helps,

Nick

Re: I need some advice on a pin nailer

#5

Re: I need some advice on a pin nailer

Bill Spievak

>If you want to drive pins longer thant 1 inch go with a Grez. If you are satisfied with driving pins 1 inch and shorter the Senco comes at an attractive price.

Re: I need some advice on a pin nailer

#6

Wow! Thanks for the help.

doug f, san clemente, ca

>Once again I'm impressed with the timely and knowledgeable responses that are so evident here.

I bit the bullet and went with the Grex. The reviews are uniformly excellent and it fits everything I need.

Thanks again for all the help.

Doug

Re: I need some advice on a pin nailer

#7

Re: pin nailer -- A Timely Question

John McGaw

>I've been considering purchasing an inexpensive pin nailer for some long-delayed picture framing/matting projects (>40 at last count!) but never got around to asking. Now I have a reference point. But it looks as though "inexpensive" is a very relative term when it comes to pin nailers.

Re: I need some advice on a pin nailer

#8

i second the grex

fred in ct

>

Re: I need some advice on a pin nailer

#9

Re: pin nailer -- A Timely Question

Bill White

>Bought mine from Toolmart for $60.00. Has not misfired yet. Can't see spending $200.00 for a tack gun.

Bill

Re: I need some advice on a pin nailer

#10

Re: pin nailer -- A Timely Question

Larry Clinton

>John, take a look at the Harbour Freight pinner. I don't have a lot of use for one so thought I would try it out. I paid less than $20 for the pinner and several pins (on sale) - actually think it was about $12.95. I have used it several times, never had a jam, sets the pins perfectly. The max pin length is limited to 1" but that is ok for most of the things I need it for. I have 15 to 18 gage, Senco, PC, & Devilbiss brad nailer's for the larger needs.

Re: I need some advice on a pin nailer

#11

Re: pin nailer -- A Timely Question

Bill R

>Longtime lurker here...

I just got the Bostich, and am very happy with it, as I have been with all my Bostich nailers.

The safety is a little awkward, but for the dirrerence in price with the more expensive units, I can certainly live with it.

Bill R,

Somewhere in Maine