Ryobi Tools-Quality?
Tom Norton
>I need to retire my Makita 9.6v drills. I have had the batteries rebuilt but they just don't hold a charge.
So>> what about Ryobi? They have this 1 battery system.
Knowledge You Can Build On — Est. 1998
Ryobi Tools-Quality?
Tom Norton
>I need to retire my Makita 9.6v drills. I have had the batteries rebuilt but they just don't hold a charge.
So>> what about Ryobi? They have this 1 battery system.
Re: Ryobi Tools-Quality?
Howard Norman
>The one battery fits all is not unique to Ryobi. I have never purchased any Ryobi tools, just never been impressed with them. I have had DeWalt, Makita, Milwaukee, and Hitachi power tools. IMHO the Milwaukee have been the best but also the most expensive.
A good friend and neighbor has several Ryobi power tools. They work but I wouldn't buy them for my own usage.
Howard
Re: Ryobi Tools-Quality?
Gary Evans Tallassee, TN
>Hi Tom,
I have many of the Ryobi 18V tools, as well as several of their corded ones. I have been buying Ryobi for the better part of 20 years and have only had problems with one reversible drill. The plastic pin that actuated the reversing switch broke. Had I known the pin was plastic, I would probably have taken better care with it.
IMHO, I don't think you can go wrong with Ryobi if your budget looks anything like mine. I'll grant that they never win the tool comparisons, but I have used mine for a number of years to make my living and I have been more than satisfied.
Also, if you have the need to drive screws, be sure to get the little impact driver. I wouldn't trade mine for anything.
Gary
Re: Ryobi Tools-Quality?
Bill Schreiber, Litchfield, NH
>I am on my second Ryobi drill and also got one for a good friend of mine after he helped me build my deck.
I have been very happy with them for light homeowner kind of uses and woodworking for the past 12 years.
Regards,
Bill
Re: Ryobi Tools-Quality?
knotscott
>I've had reasonable luck with Ryobi tools (cordless drills, BS, sander), It should be fine for hobby work, but I wouldn't expect it to be on par with a Makita, Bosch, Milwaukee, Ridgid, DW, Metabo, or PC.
Ryobi is owned by the same company that owns Ridgid and M, and is marketed as their lower end.
Re: Ryobi Tools-Quality?
George@Colonel's Workshop-Havertown PA
>Good Afternoon Tom,
I have had two Ryobi 12 vt drills which gave very nice service. I still have one of them and like its ergonomics. Its smallness and lighter weight suit my small hands and arthritis. I use my two P+C 12 vt drills primarily, as they are more capable. I'd like to try out their impact driver. Some years ago I got rid of my RAS and bought a used Ryobi 8 1/2 inch SCMS from a local trade school. It was nearly in pristine condition. They were experiencing trouble with the retraction spring on the blade guard. I got it for $200 and they threw in a couple newly sharpened Freud blades. I fixed the spring attachment with one drop of hot melt glue. It is an excellent saw, and perfect for the furniture I build. I've had it for seven years. Its used every day. Accuracy is very good. I could afford to upgrade but like the tool I have. I have had good luck with Ryobi tools in my home shop environment.
George
Re: Ryobi Tools-Quality?
teflon_jones
>I only own one Ryobi tool, a 9.6v household drill. I've had it for 4 years now and the single battery I have is still holding a charge ok, though it is starting to lose power. I've been extremely happy with it. The ergonomics, size, and power are all excellent. I have really big hands and not all drills are comfortable to hold, but I could use this one all day. Last night after being used a lot already, it sunk three 2.5" drywall screws into oak without any trouble. It actually sheared off one of the heads it had so much power still, and the battery died right after that.
Re: Ryobi Tools-Quality?
Don in Northern Arizona
>Tom,
Ryobi suits me. I have the 18volt One+ drill and I like it a lot. I am clumsy and have bounced it off my shop's concrete floor once or twice with no problem. I bought it to do disassembly job that my Makita 9.6 didn't have the muscle to do. I have had the Ryobi RE600 router in my router table for 10 or 15 years. Even if you are a contractor I would consider it. Tool thieves at construction sites abound out here, and it would be cheaper to replace than the pricier brands. Who knows, a thief might even turn up his nose at it because it isn't bright yellow.
Don