Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

coffee, anyone?

Posts

coffee, anyone?

#1

coffee, anyone?

JohnKJordan in East TN

>Thanks to Barb Siddiqui on the turning forum for the great idea to make a coffee scoop, I tried my hand at carving one.

My first attempt was from cocobolo, but I ran into an internal void and also didn't like the revealed figure, so I tried again with a piece of Pink Flame. This was cut from a big bowl blank I got from Jim King during the Katrina Relief auction a while back. The figure and color of this species is fantastic. I don't know how it fades in the long run, but I don't see any sign of fading in other things I've made after a year or so.

Tools used were bandsaw, rotary and reciprical carvers, cabinet scraper, and sandpaper. Finish is the shellac-based friction polish (Mylands) I use on many small lathe pieces.

The scoops are little things, about 4" long, the length and volume copied from the one that came with my wife's coffee maker. To get the volume right, I used some silicone putty (similar to silly putty) to fill the original scoop, then hollowed until that putty just about filled the void.

I like the way the hook feels in my hand.

JKJ


img

Re: coffee, anyone?

#2

Barb Siddiqui

Re: coffee, anyone?

Barb Siddiqui

>Great finish, John. Those are just perfect.

Re: coffee, anyone?

#3

Re: coffee, anyone?

Mike Schwing from Md.

>Very nice John. Gotta watch that carving thing, it really takes over. I don't even have a lathe anymore!

Re: coffee, anyone?

#4

Re: coffee, anyone?

JohnKJordan in East TN

>>Gotta watch that carving thing, it really takes over.

I'm "fortunate" to have a built-in throttle which tends to limit the dreaded carving addiction - my hands and fingers cramp up after a while of detail work so I can't carve for long. I never did finish the chess set I started years ago. Good clean fun, though!

In case anyone is interested, the photo below is of what I use for smoothing the inside of a hollow area. I cut the end off a curved cabinet scraper with a small Dremel cutting wheel. I sometimes use the flat on convex surfaces.

JKJ


img

Re: coffee, anyone?

#5

Ellis Walentine

Superb work!

Ellis Walentine

>I can see from your excellent photos that those scoops are faired and finished wonderfully. Nice job, John.

Ellis

Re: coffee, anyone?

#6

Re: coffee, anyone?

Tom in Tipp

>Those are pretty slick. Very nice job on carving those scoops. I may have to give one of those a try sometime.

Thanks for sharing.

Tom