Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Need 1/4" HSS rabbit bit....

Posts

Need 1/4" HSS rabbit bit....

#1

Dale Lenz

Need 1/4" HSS rabbit bit....

Dale Lenz

>with the bottom pin guide. Bearing router bit won't work for getting into a 22.5* corner. If the bit(s) are dull, that's okay, as long as they are able to be sharpened and are usable. Will be glad to pay for bit(s) and shipping. Seems the above bit is not made anymore. Please ping me.

Thanks,

Dale

Re: Need 1/4" HSS rabbit bit....

#2

Re: Need 1/4" HSS rabbit bit....

Ron Hildreth, Alta, Iowa

>Dale,

Just ran to the basement shop thinking I had one, but turns out it's 3/8' instead of 1/4", with 1/4" shank. Not sure if you're going to get a bit that "gets into a 22.5 degree corner, but maybe I'm missing something here! If the 3/8" I have will work, let me know & I'll give it to you for free, just pay shipping.

Ron in Iowa

Re: Need 1/4" HSS rabbit bit....

#3

Dale Lenz

Re: Need 1/4" HSS rabbit bit....

Dale Lenz

>I have one 1/4" HSS rabbeting bit and it does work, opps, my joints are cut at 22.5*, the angle is 45*, sorry. I'm going one step further and have discussed it with my sharpen guy, he is going to grind my 1/4" bit down to 3/16" I just want another 1/4" to replace/or back up on. Don't like going into unknown waters without a back-up plan.

Thanks again for your offer, but I need 1/4". Dale