Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

straight line gloat

Posts

straight line gloat

#1

straight line gloat

JRutter

>Some of you saw my shop last summer before Sophie's BBQ. Up front, I had an old PM66 with 4-wheel feeder for rough ripping. Well, not any more!

Here's the old setup.


And the new solution.


I just finished the DC connection yesterday, so we haven't used it for production yet. But the test boards were amazingly good - I mean an edge cleaner than the jointer! Considering how much ripping I do, I want to kick myself for sticking with the first setup for so long. The new saw has a laser line to help line up the first edge cut, and an incomplete ProScale fence gauge for the second fence cut. I happen to have an old display, so I'll be fabricating a bracket to attach it to the fence. 15 HP main motor(!) Big arbor with widely spaced bearings. Virtually invisible saw marks. You have to hustle to keep up with it...

The scrap cart is a test run. The double uprights will guide a 12" Sawzall blade to cut the strips down to firebox size. Hard to tell from the pic, but most of it sits under the table top overhang.