Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Waterbase finish question

Posts

Waterbase finish question

#1

Waterbase finish question

Jeff Weaver

>I have a small box project coming up where I will use either maple or holly, and I want to keep the "white" look to the wood as much as I can without the ambering associated with oil-based varnishes. From what I have read so far, water-based poly should be my choice for a truly clear finish. My problem is brushing on finishes. The quality of my finishes went way up when I switched to wipe-on varnishes and oil/varnish mixtures. I'm just a lousy "painter," and always had brush marks, runs and drips with brush-on poly. So my question is this, can I use water-based poly as a wipe-on? What I have available locally (Lowes/Home Depot) are Minwax Polycrylic and Olympic waterbased. From reading the cans, they don't recommend thinning with water. Can they be used as a wipe-on straight from the can? Any preferences among these? Other suggestions?

Thanks in advance.

Jeff Weaver

Re: Waterbase finish question

#2

Re: Waterbase finish question

Mike Schwing from Maryland

>You can wipe it on, yes. You'll take longer to build depth, but thats no big deal. I just finished a project (see box below) that used a water based finish as the topcoat and I brushed it on with good results. You're going to rub it out anyway, right? Whats a few drips/runs?

I also finished a holly project with water based "resisthane" or something like that. It was remarkably clear and built fast. I used a foam brush to apply it in thin coats, sanding in between.

Use a 2 part bleach on that holly to really get it white.

Re: Waterbase finish question

#3

yes and no *LINK*

Michael Dresdner

>Because of the way waterbased finishes form a film, you can seriously disrupt the curing by wiping it on and off. It will look fine when you are done but will not hold up.

The good news is that there are waterbased coatings formulated specifically for wipe on application, just as there are oil based coatings specifically formulated for wipe on. Because they are waterbased, they can be safely and inexpensively shipped as well, so you are not restricted to local purchase. Here's one to get you started. This one is called Rockler WonderCote.


http://www.rockler.com/product.cfm?page=10555

Re: Waterbase finish question

#4

Thanks guys

Jeff Weaver

>