Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Box

Posts

Box

#1

Box

Mike Schwing from Maryland

>Simple box from a solid block of maple burl. No glue, no joints, just a simple box. When you open the top, you can see that it is bookmatched at the hinges. Well, I guess you can from the front, due to the bark inclusion. Comments welcome.



Re: Box

#2

Re: Box

Kneale Brownson awaiting snow in N. MI

>Really interesting. What are the dimensions?

Re: Box

#3

JL

Re: Box

JL

>Really nice box. Two questions. What did you hollow it out with? What was your finishing protocol?

Really interesting piece of wood! Were you tempted to use it for turning instead?

Re: Box

#4

Re: Box

Mike Schwing from Maryland

>Thanks guys. Sorry I forgot the dimensions, it is 9 1/4" x 6" x ?".

I made a router template that fit over the top of the interior and used a guide bushing to do the hollowing. I think next time I'll remove the interior partition. I also want to do one with a sloped surface front to back and will do that with the table saw.

It is finished with 1 coat of Watco, several coats of shellac, then with general finishes high performance topcoat. It is rubbed to a very low sheen.

Re: Box

#5

Re: Box

George@Colonel's Workshop-Havertown PA

>Good Afternoon Mike,

The box is nifty enough, for sure. Imaginitive design and execution. What makes my socks come off is the finish. It is dramatic. Love the bark inclusion, which I probably would not have saved by thinking ahead and envisioning the final product. Wish I did that box!

George

Re: Box

#6

Very striking!

Jim Dillon

>Mike,

I agree with George that your decision to keep the bark edge really adds interest to an already striking piece of wood. And your choice of finish sure worked out well. Since you asked, my only comment would be that I might have rounded the edges just a bit with a 3/16-1/4 inch roundover bit, but that is just my style, not yours. Thanks for posting.

Jim

Re: Box

#7

Re: Box

Brian in Dawson Creek

>Spectacular wood, very nice job.

Brian

Re: Box

#8

VERY VERY nice!

Brian in Sandusky, OH

>

Re: Box

#9

Re: Box

Mike Fitterling

>Simply beautiful. It really shows how much inherent beauty is in wood itself, as opposed to us "designing" beauty into a piece.

Re: Box

#10

Re:Great Job!!You have given me an idea!!!

lee beeden

>

Re: Box

#11

Re: Box

Randy G

>Mike,

I've been admiring your work for quite a while. That is an awesome box, you did a great job with Highly figured wood.

Re: Box

#12

Re: Box

Michael Wilkins

>One question: How did you hollow out the inside?? I could not see any glue lines near the bottom, which would lead me to believe that you used a router set-up to get these compartments.

Thanks and this is a great project.

Re: Box

#13

I really like it Mike! Well done!

HC Sakman

>