Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Just wanted to say....

Posts

Just wanted to say....

#1

Just wanted to say....

Brian D

>I've been away from this board for quite a while. Only poked my head in once in a while. I have a couple of young kids ages 6 & 9 so as a result I haven't had much time lately for making sawdust. But I just wanted to say what a great bunch of friendly people there are in here. I've also poked around on some other sites of interest (motorcycles & R/C gliders) and they contain a bit more squabbling and prima donnas but this site has always been down-to-earth, helpful and friendly and I just wanted to let everybody know it is appreciated.

Thanks!

Stepping down from my soap box now.

Re: Just wanted to say....

#2

I agree completely

Dan Mitchell

>I've been using the Internet since the late 1980's, and since I have pretty wide interests (or as my wife would say, a short attention span ;-) I've been on a LOT of discussion groups in just about every format possible, listservs, newsgroups, site based forums like this one, you name it. On well over half of these, you could not go more than a few days without some discussion degrading into sarcasm or insult, or someone belittling someone else for asking a totally appropriate though perhaps basic question, (or simply one that differed with the responder's personal philosophy on the subject) etc. I'm sure there are more, but in groups which are open to anyone & outside of heavily moderated discussions where each post is vetted before appearing, I've found 3 forums which have struck me as notable in their consistent absence of this childish behavior; this one, the computer support group http://www.pcguide.com/, and the newsgroup sci.electronics.repair (a NEWSGROUP which is consistently civil is especially rare). This is my 2nd foray into woodworking (had to sell off my equipment when we moved across the country, then we rented a place with no shop room), & the 2nd time I've used this site, the original time being (if memory serves) before it was moved from Badger Pond. It's always been an extremely easy place to feel welcome.

Dan

Re: Just wanted to say....

#3

Ellis Walentine

Thanks, Brian

Ellis Walentine

>It's always nice to hear compliments about the cordial and supportive atmosphere on our forums. It couldn't exist without a fantastic bunch of visitors who have a similar appreciation of civil behavior. I'm convinced that mutual respect is contagious.

Don't be a stranger, and thanks again.

Ellis Walentine, Host

Re: Just wanted to say....

#4

Ditto what Brian said.

Joe in a Cleveland suburb

>

Re: Just wanted to say....

#5

Can't agree.....

Mark Goodall - ATL - tooljunkie

>Can't agree more. I frequent a motorcycle forum, one of the nicer ones, and a percentage of posts and not only unfriendly, they're nasty. I guy went and bought a $400 pair of riding boots and wanted to "share his joy about his new toy" and there were people bashing that brand and model boot and saying how their's were so much better. Idiots!

People here are so much nicer! Someone goes and buys a PM66, or a Unisaw or a Grizzly tablesaw or a Rigid tablesaw and even the tool snobs (like me sometimes) are going to congratulate them.

You people are great. Sometimes you need to see how others act elsewhere to fully appreciate you here.

Happy Woodworking!

Re: Just wanted to say....

#6

Re: I agree completely

Dave Bair, Eaton Rapids, MI

>Just a note on the history here: Wood Central and Badger Pond were concurrent sites and many of us posted on both. When the Pond folded, Ellis took in the refugees and made a host of upgrades to accomodate us. We are forever grateful.