Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Finishing End Grain / Poplar

Posts

Finishing End Grain / Poplar

#1

Finishing End Grain / Poplar

Eric

>I made a few Votive Candle holders to give out as christmas gifts. I use some poplar i had left over from an earlier project. I have heard and read about the nighmares of staining poplar but i finished one piece in a dark walnut stain and i am happy with the results with the exception of the end grain. Being a novice i read somewhere that you can seal the endgrain with 3 parts gum turpentine mixed with 1 part boiled linseed oil. Does anyone know if this is a good technique to seal the endgrain or do you know of another method. The endgrain on the piece i completed is way to dark and looks black compared to the rest of the piece. Any help would be gretely appreciated....

Re: Finishing End Grain / Poplar

#2

proper sanding cures this ill

Bill Tindall, E.TN

>End grain has torn grain from the saw and it must all be removed because it is a sponge to stain. Sand with 100 grit until there are NO dull areas. If part of the end grain remains dull it is because this part is trapping sanding dust, which means the grain is still torn there and that part will stain dark. Next go to 120, 150 or 180 depending on what you have on hand. And repeat until the area is all shiny. It should be shiny like it has been finished with wax. Finish up with 220. In terms of time 80% will be on 100 and 20% on the rest. Garnet paper is better than other paper for end grain but I use what I have on hand, I always stain wood and my end grain is never any different than the rest of a piece.

If you have a crappy or dull saw blade you will be sanding a long time to be rid of torn grain. I usually plane end grain when I can easily get at it with a plane. Then I sand as described above. Planing just hastens the effort.

Re: Finishing End Grain / Poplar

#3

Re: proper sanding cures this ill

Eric

>thanks for the info... so if i sand properly i do not need a sealer? i should have included a comment about my halloween trick or treaters, based on the responses above, that would have gotten me alot more suggestions.... hope everyone had a safe day!! Tommorrow will be sanding day!

Re: Finishing End Grain / Poplar

#4

Ellis Walentine

Stain conditioning

Ellis Walentine

>Proper sanding, as Bill said, should cure your endgrain problem, but there's no harm in trying out your linseed oil mixture as well. Mixes like that are known as "conditioners" because they limit the amount of stain that the wood can soak up. Generally, you brush on a coat of conditioner and then apply your stain while the conditioner is still wet. Conditioners are for oil-based stains, of course. Dye stains usually appear quite uniform even without any special treatment.

Ellis Walentine, Host

Re: Finishing End Grain / Poplar

#5

Re: Finishing End Grain / Poplar

Charles Sharp

>I usually go one grit finer on the end grain then I used on the long grain.