drill sharpening device, recommendation
Bill Tindall, E.TN
>The club would like to buy a twist drill sharpening device to loan out. Does anyone have a recommendation on whether the inexpensive models work and what is best?
Knowledge You Can Build On — Est. 1998
drill sharpening device, recommendation
Bill Tindall, E.TN
>The club would like to buy a twist drill sharpening device to loan out. Does anyone have a recommendation on whether the inexpensive models work and what is best?
Re: drill sharpening device, recommendation
Ray Binnicker
>Bill,
I think the Drill Doctor is about as good as you can get, especially if it will be used by folks of all skill levels.
Ray Binnicker
Re: drill sharpening device, recommendation
Clint Searl, at the base of Haycock Mtn
>Drill bits are consumables. One's time is better spent than sharpening bits. Even practicing cutting dovetails is more worthwhile.
Clint
Re: drill sharpening device, recommendation
George@Colonel's Workshop-Havertown PA
>Good Evening Clint,
Well, that's a twist. :<)
George
Re: drill sharpening device, recommendation
Howard Norman
>I have a Drill Doctor, model 700 or 750, I forget which. I like it and would recommend it.
Howard
Re: drill sharpening device, recommendation
JohnKJordan in East TN
>Drill bits may be consumables, but I get a lot of extra consumption out of my small bits (up to 1/2" or so) with the drill doctor. There are several different models and the cheaper ones have more limitations. It's actually very quick to set up and use.
The big bits I sharpen by hand on the bench grinder just like the old machinist taught me.
JKJ
Re: drill sharpening device, recommendation
Don Orr
>Tough to beat the Drill Dr. I love mine. I used one from our club's tool crib first and liked it so much I got my own. Very easy to use and service and durable.
thanks to all, it will be in budget
Bill Tindall, E.TN
>