Where Hardwood lumber Comes From- 9A Drying
Bill Tindall, E.TN
>Part 9 A Drying will be posted in 4 parts, A-D which I will post over the next few days. For those that do, or want to, dry their own lumber I have provided more details than in previous posts.
What happens to lumber after the green chain(see Part 8 ) has changed markedly in the past twenty years. In the past there were numerous small mills in my area and they supplied lumber to the area furniture factories, flooring factories, kitchen cabinet factories, and other high volume end users of hardwood lumber. The lumber was seldom end trimmed or even graded at the mill. The lumber was sent by truck to these nearby factories where it was graded, stacked with sticks between the layers to enable air circulation and piled out doors in stacks as high as a fork lift would reach, about 20�. It was not uncommon to see hundreds of thousand bdft drying by these factories. When the lumber had air dried to around 30% �MC� (moisture content) it was moved to steam heated kilns and dried to about 7% MC. The factories used their wood waste to make the steam. Most of these furniture factories have closed so today these local markets are gone, as well as the small mills that supplied them.
Today huge and highly automated lumber operations sawing as much as 100,000 bdft of lumber per day dominate hardwood lumber production. It is common for these large mills to have drying facilities integrated into their operations. These mills have found it useful to produce attractive bundles of lumber for sale, often for the export market. From 50 to 70% of the hardwood lumber produced in recent years was exported.
What happens to lumber after it comes off the green chain varies widely among mills, depending on the market for their lumber. In what follows I will describe some typical operations found in my area.
Before the lumber leaves the green chain the lumber will almost always be double end trimmed to a length about 2� longer than nominal foot increments. This operation makes the bundles more tidy at the expense of about 4� of end trimmings going to waste. I prefer untrimmed lumber for my use and get this extra 4� for free. The ends may be sealed but often they are not. The lumber will be assembled into packs of about 1000 bdft according to species, length and grade. The lumber packs may be dipped in a chemical bath to prevent the growth of mold and fungus, but more often it is not dipped. If the lumber is to be sold green then the packs are banded, loaded onto trucks and sent to the domestic customer or shipping point for export.



