Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

What is that glue he's using (Marks)

Posts

What is that glue he's using (Marks)

#1

What is that glue he's using (Marks)

Mike Schwing from Md.

>I watch a lot of "WoodWorks" with David Marks. Had a fun night of drinking with him at the AAW symposium a few years ago in fact. Got him to write a note to Mrs. Schwingding on a napkin because it's the only woodworking show she'll watch. (she thinks he's cute). Anyway, I always enjoy his show and his generous use of templates and flush trim router bits has rubbed off on me big time.

I digress, again.

Very frequently he uses a "plastic resin glue". He's careful not to endorse any particular products on his show, and if you watch it for any amount of time, you'll notice the cans/bottles, etc.. are all covered in brown paper and labeled simply "tung oil", or "yellow glue", or "linseed oil"..

What might the "plastic resin glue" be? Any guesses at brands?

Thanks!

Re: What is that glue he's using (Marks)

#2

found it

Mike Schwing from Md.

>Answering my own post..what has become of me? It is on his website of course.

3) Where can I get the Slow-Setting Plastic Resin Glue you often use?

There are several types that I would recommend. Specifically, I am referring to urea formaldehyde glue such as Weldwood or Cascamite. Weldwood is manufactured by the DAP company, which can be reached at (888) DAP-TIPS. You should be able to find this glue available at most hardware stores. I have also had excellent results with Urac 185, which is manufactured by the American Cyanamid Company in Wayne, NJ. It is available in retail quantities from Highland Hardware www.highlandhardware.com. Their phone number is (800) 241-6748. Urac 185 can also be obtained through the Nelson Paint Company, whose mailing address is One Nelson Dr., P.O. Box 2040 Kingsford, Mich. 49802. Their telephone number is (800) 236-9278. Other urea formaldehyde glues on the market are Unibond and Resorcinol.

Resorcinol glue is generally used on boats because it's completely water proof when cured. It does however leave a dark glue line which would be objectionable on light colored woods. Resorcinol can be found at your local hardware store.

Re: What is that glue he's using (Marks)

#3

Do these glues off-gas formeldihyde?

Chad Pearson

>

Re: What is that glue he's using (Marks)

#4

Re: found it

Thomas S Stockton

>Mike

Having a few beers with David can be pretty entertaining. I've had good luck finding weldwood brand plastic resin glue at Ace hardware stores and sometimes home depot. I'm not so sure resorcinol is an urea formaldehyde glue, i believe it is a different type of glue, anyway I don't care for it at all but it does have it's place and is waterproof and also has a purple glue line.

Tom

Re: What is that glue he's using (Marks)

#5

Hey Thomas - a question

Robert W - aka nailshooter

>I have never personally met the man, but he was here at our local Woodcraft for a demo/promo, and didn't come off well at all. He was all kinds of rude to some of the older guys that do woodworking for fun (how much better will you actually get by practicing when you are 75?) when all they were looking for a smile and some acknowledgement of effort. He was not at all nice to some of our craftsman, either.

You think it was a bad day for him, or are his people skills a little lacking?

Just wondering...

Robert

Re: What is that glue he's using (Marks)

#6

Re: Hey Thomas - a question

Mike Schwing from Md.

>I'm not Thomas of course, but I've been in touch with him (Marks) today, and he was a nice as when I drank with him at the bar.

Re: What is that glue he's using (Marks)

#7

yes

Michael Dresdner

>

Re: What is that glue he's using (Marks)

#8

Re: What is that glue he's using (Marks)

Brian in Brighton

>Mike, I have never seen anyone use this weldwood glue for woodworking. Where is he using it and on what types of woods?

Brian in Brighton

Re: What is that glue he's using (Marks)

#9

Re: What is that glue he's using (Marks) *LINK*

Bruce, a MN Galoot

>I've used it. Since it leaves a dark glue line, it's best used on woods where you don't care about the glue line color, or on dark woods where it's not noticeable. It's also good for structural applications.

It dries very, very hard, has a long open time, is hard on chisels and planes and so it's best cleaned off with a belt sander or some such abrasive. It absolutely doesn't creep, so it's good on things that you dont want to creep, like rocking chair rockers or other laminated objects. It's highly water resistant.

Go here for tech info:


DAP Weldwood Plastic Resin Glue

Re: What is that glue he's using (Marks)

#10

Re: Hey Thomas - a question

Thomas S Stockton

>Robert,

I would chalk it up to a bad day or male PMS. David is a very nice guy and his people skills are one of his strong suits. the last short appreniceship I did through the Baulines Crafts Guild was a month I spent in his shop bettering my finish skills and he is extremely generous with his time. This was long before the Tv show and I don't think that it changed him much.

Tom

Re: What is that glue he's using (Marks)

#11

Re: What is that glue he's using (Marks)

Thomas S Stockton

>I use it for bent laminations because it doesn't creep at all.

Tom

Re: What is that glue he's using (Marks)

#12

Jesper, Denmark

Re: Do these glues off-gas formeldihyde?

Jesper, Denmark

>No