Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Coloring Epoxy

Posts

Coloring Epoxy

#1

Coloring Epoxy

Jim Orasky in Davenport IA

>Need to fill some small defects in white oak. Thought about using epoxy colored with transtint. Anyone ever try this. Does it affect the bonding?

Re: Coloring Epoxy

#2

Works Well, Bond is Fine

Mark Mandell - Gone Round In Jersey

>

Re: Coloring Epoxy

#3

Re: Coloring Epoxy

Brian in Sandusky, OH

>yes...it will work fine.

I used that exact formula to fill come voids before turning a bowl...turned out real nice.

But it will be translucent....not sure it that's your intention.

Re: Coloring Epoxy

#4

Re: Coloring Epoxy

Ken Platt (North Granby, CT)

>I've colored epoxy with all kinds of stuff, but never transtint. I would think it'd work, but maybe some of the sawdust from the project itself would be better and cheaper. Also, don't forget the old trick of putting a drop of CA glue in the defect and then sanding with fine grit paper. I use old worn out sandpaper since the piece ends up clogged with glue/dust. For small defects that I want to vanish, this trick is one of the best in my trick bag.

Ken

Re: Coloring Epoxy

#5

Re: Coloring Epoxy

Jim Orasky in Davenport IA

>I'll give the transtint and the sawdust both a try. Thanks for the advice.

Re: Coloring Epoxy

#6

I keep reading Saw-dust

Keith Newton

>Which I think is too coarse to use for filler for epoxy. However I use dust from my sander bags regularly. It will usually come out a darker color than the raw wood, but then that is how I think it should look.

Most of the time, I mix about half colloidal silica and dust.

I also like the CA and dust for smaller quicker filling. and have used universal tints with bondo which is fast also.