Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Brown Rot, White Rot and other Wood Pestilence.

Posts

Brown Rot, White Rot and other Wood Pestilence.

#1

Brown Rot, White Rot and other Wood Pestilence.

Bob Smalser

>Bob,

Punky wood...is that the stuff that isn't really rotted yet, but it's on it's way? Dark, even black, solid but a little soft, hard to dry out. I wonder if my floors and keel are punky at this point? How does one define it?

Grow, mill and airdry enough lumber, plus restore several old boats and you eventually get to see it all, so I�ve saved some examples of pest damage to show you what�s what, what�s bad, what�s not, what you can do about it, and some why�s and wherefores. I�ll start with the worst.

Brown Rot


Often called �dry rot�, but there�s nothing dry about the results of this fungus attack that consumes both the cellulose that provides wood fibers their strength and the lignin that holds those fibers together. Like all fungus, the spores of these species are everywhere in the environment, but they need warmth, oxygen, moisture and food to germinate and grow. Alter those conditions to inhibit it.

Temperature. Between 75 and 90 degrees F are ideal, and below or above that range germination tapers off on a linear scale until 40 or 105 degrees where it stops entirely. Where I am, 55 degrees and lower stops significant fungus activity in wood. High temperatures kill fungus entirely, which is one reason for kilning wood to the international standard of �56/30� or 56 degrees C for 30 minutes.

Oxygen. While oxygen is required, significant airflow deters spores from gaining a foothold, so ventilation is useful in prevention.

Moisture. Like all organisms, these need water, and 20% moisture content is their threshold. That�s another reason why construction lumber for domestic consumption is generally kilned to 19% Equilibrium Moisture Content � to prevent the stains and worse damage caused by fungus. Kilning to the 56/30 international standard for a �KD-HT� (heat treated) stamp also coincides nicely with the domestic �KD-19� (kiln dried 19%) stamp. �HT� wood here runs around 16% EMC, which is adequately dry for immediate exterior or marine use without the danger of overkilning damage.

Food. While the species that cause Brown Rot eat any cellulose, most other fungus prefer the sugars found in sapwood, where most problems begin. Saturating or coating wood with preservatives like copper and lead poison their food to prevent growth, as do the natural extractives found in the heartwood of durable species. Extractive is a 5-dollar word describing the concentration of salts, colorful resins and acids that occur as the cells of sopping-wet, weak, sugar-laden sapwood transition to the relatively-dry, tough, heartwood that provides the tree�s stem its strength.


Because it consumes both cellulose and lignin and is self-generating, Brown Rot causes severe damage quickly if left unchecked. Here you see that planing the surface didn�t remove the rot pockets, which remain discolored and spongy. If I were to plane off a little more surface, I�d arrive at wood merely discolored. This is called �incipient rot� because the fungus species causing the discoloration are still there waiting for the right conditions to grow again.


Brown Rot is self-generating because removal of cellulose and lignin create a sponginess that is hygroscopic as well as structurally unsound. Here you see the rotted area of this old cedar fence post is at 29% EMC on the �A� Scale of my moisture meter�.


�while the sound wood only a few inches above the rot is only at 16% EMC on the �B� Scale, well below the 20% threshold for fungal growth, and a huge difference in moisture between sound and rotten. But not for long if that post is left intact and outdoors, because the wet area full of wood-destroying fungus will grow. A good moisture meter with pin electrodes can easily help you find hidden pockets of rot when surveying a boat. Just carry a small tube of 3M 5200 to fix the holes when you are done.


What to do when you find the soft wood that indicates rot? Remove it all the way back to good wood and replace or repair it. Brown Rot is almost always deeper than your first assessment:


Continued�.

Re: Brown Rot, White Rot and other Wood Pestilence.

#2

Pestilence Part II

Bob Smalser

>

When excavation reaches the incipient stage of only discoloration of otherwise sound wood, CPES (an epoxy sealer) may be useful to isolate the remaining spores and reduce the wood�s potential to absorb moisture prior to replacing the structure lost to the rot.

White Rot


Sometimes called �slime� or �wet� rot, the fungus species responsible for White Rot are most often found in non-durable hardwoods where they cause spalting. Here you see large patches of White Rot in a sea of Blue Mold.


Like all fungi, tendrils or hyphae spread the fungus to areas favorable for its growth, these sufficiently large to be obvious.


When they attack softwoods like the Douglas Fir shown here, they don�t seem to penetrate as deeply or as quickly as does Brown Rot and can often be planed off to no ill affect to the use of the wood.


Incipient White Rot on a sapwood edge of roughcut Douglas Fir 2X stock.

Soft Rot

Soft Rot is caused by another group of fungus species and is generally found in telephone poles and other buried posts immediately above ground level. The entire surface of the wood becomes punky and can be lifted off in sheets.

Lichens


Continued�.

Re: Brown Rot, White Rot and other Wood Pestilence.

#3

Re: Pestilence Part III

Bob Smalser

>

Interesting and sometimes colorful little algae-fungus combinations that are generally harmless and can be brushed off.

Blue Mold and Ambrosia Beetles

You�ll find Blue Mold (or Blue Stain) without Ambrosia Beetles but you�ll never find Ambrosia Beetles without the stain. Various species of molds and sapwood stains feed off the moist sugars in sapwood and discolor it in the process, often permanently.


Here you can see bluish discoloration in the sapwood edge of a Douglas Fir joist. As the joist was recently scrubbed with full-strength bleach, the stain is permanent. You can also see a few bluish pin holes in the sapwood from Ambrosia Beetles. These insects attack stacked logs and downed trees still having intact bark throughout the warm months of the year within as short a period as two weeks. The adult beetles bore through the bark into the wet sapwood, lay their eggs in the tunnels, and depart. Their secretions plus the sugar in the sapwood attracts Blue Mold development in the tunnels, which their larvae feed on after they hatch and also eventually exit the log to continue the cycle. In some woods the result is considered attractive, and there is a market for �Ambrosia Maple� as one example. Prevention measures include milling immediately in summer, debarking or ponding logs waiting to be milled, including continuous irrigation of the log stacks with water, which also inhibits other fungi due to oxygen depletion.

Carpenter Ants

Carpenter ants come in small and large sizes and also don�t eat wood, but use it for nesting. They require warmth and nearby food � remove one or both to drive them away.


The tiny species don�t have big munchers and seem to only attack wood already softened by fungus, here where a sapwood sticker in a board stack rotted and was attacked by the ants. The photo is of the mostly heartwood board beneath it and you can see where the ants attempted to bore, but only succeeded in a small area of sapwood. These aren�t a big problem here, and the damage can be planed off.


The large species are incredibly tough, can chew their way through almost anything, and here prefer to nest in the pith areas of live cedar trees, often forming centuries-old colonies of vast numbers. In the lumber yard, they usually don�t attack stickered stock through around 4X thickness, because there isn�t enough protection from the cold in relatively thin boards. They don�t usually attack stickered 6X and 8X beams like the one shown either, but if you are sufficiently absentminded to restack them touching each other after grading, you provide 8-12X of insulation and a perfect entry point for the ants. When they infest the wood or insulation in your house, what they are attracted to is the warmth. Sprinkle a persistent insecticide like Diazinon around the outside foundation of your house and beneath your lumber stacks when the temperature reaches 55 degrees in the spring.

Powder Post Beetles


A much more serious pest, the various species of Powder Post (or Furniture) Beetles eat the starch contained in wood instead of just nest in it, and penetrate throughout the heartwood as well as the sapwood. They are common in barn timbers, old furniture once stored in barns, and hardwood stacks overgrown with vegetation that inhibits air flow. One variety even penetrates hard varnish finishes to get to the wood beneath. There are various home remedies of fuming and borates but none are 100% reliable. To eliminate every stage of the beetle, infested wood must be kilned per the �KD-HT� schedule previously discussed.

Preventions are usually easier than cures, but knowing which pests are fatal and which are merely cosmetic helps you pick your battles.

Reference: A.J. Panshin and Carl de Zeeuw, Textbook of Wood Technology 3rd Ed, McGraw-Hill 1970.

Re: Brown Rot, White Rot and other Wood Pestilence.

#4

Great Post, Bob, Thanks.....

Barry Irby

>I deal with this day in and day out as a Home Inspector and it backs up everything I thought I knew about wood rot.

A couple of Additions and questions:

Wood equilibrates at a Moisture Content about 1/5 that of the Relative Humidity of the surrounding air. So, if the Crawl Space of your house is soggy and at 100% RH, the lumber will arrive at 20%MC and rot will set in. There is a group of fungi that we call Nuisance Fungi that will start to grow on the surface when the MC is above 15 or 16%. They are usually relatively harmless to the lumber and appreantly do not have the ability to break down the cellulose and cannot penetrate the cell walls. Its living off the starches and sugars exposed when the lumber was milled and cells were ripped open. As a Home Inspector, I treat them as a waring that if the area gets and remains wetter than it is now, the lumber will rot. Part of the "nuisance" is that they stink and may leave the house with an acrid smell. I would like to know definitively if any of them are harmful to humans.

Another question I have is about the moving air. We have seen a bunch of schemes for drying out Crawl Spaces. On ecompany I know of installed fans (Usually four cheap box fans) that just swirl the air in a circle. They claim that since dew does not form on a windy night, all you have to do is keep the air moving and the moisture won't "settle out" on the lumber and the fungi will not be able to survive. This makes no since to me at all. My belief is that the lumber will still alive at a MC abut on fifth that of the surrounding air and that some spores will land and start their work. What do you think?

I also agree with your repair method of removing the wood back to sound wood. We commonly see people scrape away the rotted portion and fill the area with Plastic Wood or Bondo. I tell the the living fungi is far up into he apparently sound or slightly damaged wood and that the rot will continue and the patch will fall out. Agree or Disagree? Got any concise references?

Thanks again for the post, this should be in the Articles section.

Re: Brown Rot, White Rot and other Wood Pestilence.

#5

Dale Lenz

Re: Pestilence Part III

Dale Lenz

>***You�ll find Blue Mold (or Blue Stain) without Ambrosia Beetles but you�ll never find Ambrosia Beetles without the stain.***

Bob: Thanks for your time, effort and information, as always, well written.

Your reference you cited was the same book I learned from, good source. I have the pleasure of attending several hours of lecture once a year from Dr. Fred Lamb, Wood Technologist from VA-Tech. A few years ago Fred indicated that sometime the Ambrosia miss calculates/or the wood dries out quicker than the bug expects and no stain/food is manufactured, obviously, the new brood is not going to survive. Just something new that has been discovered since 1970.

Respectfully,

Dale Lenz

Re: Brown Rot, White Rot and other Wood Pestilence.

#6

Lichens?

Bob Smalser

>Most Brown Rot species in the wild form "conks" or leaves of fungus with deeply penetrating hyphae on rotting tree trunks, and aren't harmless. I wonder if your harmless "fungi" aren't a type of lichen instead, as lichens don't penetrate the cell walls at all and can be removed with a stiff broom.

Wood reaches equilibrium based on humidity alone and air flow has no real effect on that. Neither does rain for that matter. All I believe air flow does is make it harder for the spores to settle in a crevise and germinate.

Re: Brown Rot, White Rot and other Wood Pestilence.

#7

Interesting

Bob Smalser

>Thanks.

I do my best to avoid Ambrosia, that's why I don't have a more obvious example of infestation.

Re: Brown Rot, White Rot and other Wood Pestilence.

#8

Does not look like Lichens

Barry Irby

>What I see (in the vast majority of Crawl spaces I go into) does not look like lichens. It appears to be little fuzzy colonies, each less than a 1/4" across and scattered on the surface. They are usually brown or taupe colored and appear fluffy. They almost look like someone took chocolate powder and spritzed it on the surface. Some of it may be a light in color as talc, but it is usually dark. You can brush it very gently with a finger tip and smear it. If it dries out it appears to go into a cyst stage and shrivel up and become difficult to smear. I wish I knew more on this topic.

Half (or should I say 90%) of what is circulating is BS.

For instance, as you mentioned, the mold spores for white and brown rot are Ubiquitous, meaning they are always present and everywhere. The companies doing mold testing set up mold monitoring equipment that capture the spores by blowing a given amount of air onto a sticky surface. Then they say "Ah Ha! You have the spores of brown rot!" and they offer to treat the situation for you. At an enormous cost. Some of this is the current version of Snake Oil.

Re: Brown Rot, White Rot and other Wood Pestilence.

#9

Dale Lenz

Re: Interesting

Dale Lenz

>Another thing Fred said: Ambrosia tunnels across the grain and PPB goes w/the grain like termites. Our local sycamores seems to have a lot of Ambrosia infestations, at least that's what I've been calling them. I've heard them referred to as flag beetles also. I'm assuming due to the stain that looks like tiny flags(??).

On the other hand, I believe wood entomology is a specialize field and just because someone has a PhD in Wood Technology does not make them an expert in all phases of wood science. Once again thanks for the post.

Re: Brown Rot, White Rot and other Wood Pestilence.

#10

Angel Hair

Bob Smalser

>OK, I've seen them. Totally harmless, but a definite indicator more ventilation would be useful.

Re: Brown Rot, White Rot and other Wood Pestilence.

#11

Re: Angel Hair

Barry Irby

>Thanks Bob. Never heard it called Angel Hair.

About that ventilation, I'm in humid south-side Virginia. Ventilation of crawl spaces is tricky around here. You could be letting in moisture instead of letting it out. This is a definite problem locally and I wish I had a good answer.