Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Miller Dowels on a Stool...???

Posts

Miller Dowels on a Stool...???

#1

Miller Dowels on a Stool...???

Rob Hix - King George, VA

>Hey all,

My beautiful wife wants some new stools for the kitchen. Wanting to increase my skills, I am going to try to tackle the project. We have chosen the stools that Gary Rogowski detailed in his article in the March/April 1988 issue of Fine woodworking. He used wedged through mortise and tenon joints. I am wondering if the 2x Miller Dowels would be strong enough to use in this application. For me right now it will either be 2x Miller dowels or loose mortise and tenon.

What do you all think about Miller dowels holding together a stool?

Thanks in advance,

Rob Hix

Re: Miller Dowels on a Stool...???

#2

JL

Re: Miller Dowels on a Stool...???

JL

>That's a tough one. I've not used Miller Dowels, though I've seen them. I use 5/8" tenons for my chair and stool stretchers. They hold up fine.

What is the narrowest cross-section of the dowel - maybe 1/4"? That seems to be a bit light to hold up against the strains. If you use several dowels - that might work.

My personal preference would be to use thicker material. Perhaps loose tenons?