Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

OT - Copper battery wire corrosion removal

Posts

OT - Copper battery wire corrosion removal

#1

OT - Copper battery wire corrosion removal

Mark Kauder, Phenix City, AL

>What is a good method of removing the corrosion build up on the twisted copper wires from the battery on my truck? This is the built up corrosion between the twisted strands.

Thanks

Mark

Re: OT - Copper battery wire corrosion removal

#2

Re: OT - Copper battery wire corrosion removal

David Sparks

>I think baking soda and water will do it. I have had the cable be corroded far down inside the insulation. That usually is a sign that you need a new cable.

Re: OT - Copper battery wire corrosion removal

#3

Second the baking soda & water

Nat Robison

>

Re: OT - Copper battery wire corrosion removal

#4

Re: OT - Copper battery wire corrosion removal

Mark Kauder, Phenix City, AL

>Thanks guys. In the end, I ended up cutting the cables back (had enough slack), I did use some acid, and then the baking soda to neutralise the acid.

Thanks again,

Mark

Re: OT - Copper battery wire corrosion removal

#5

Re: OT - Copper battery wire corrosion removal

Ron Hildreth, Alta, Iowa

>Coke and a stiff wire brush always worked for me. Use about half the can on the wire, the other half mixed with Jack Daniels!

Ron in Iowa

Re: OT - Copper battery wire corrosion removal

#6

Terminal coating.

Basil

>Now hit the auto store and buy a spray can of "battery terminal protector". They're any number of brand names that work.

Spray a liberal coat on the battery post, inside the cable end, then attach cable to battery and then apply another coat on everything after you finish attaching the cable to the battery.

This usually keeps it corrosion free for the life of the battery (3 yrs).

Re: OT - Copper battery wire corrosion removal

#7

Re: OT - Copper battery wire corrosion removal

Ken Oakley-Sunny St. Cloud, Fla

>Alka Seltzer works too. Some people use Coca Cola.

Re: OT - Copper battery wire corrosion removal

#8

Re: Terminal coating.

JohnKJordan in East TN

>>buy a spray can of "battery terminal protector".

I find grease works as well. I've had no corrosion since I started gobbing all over.

JKJ

Re: OT - Copper battery wire corrosion removal

#9

Jason Roehl in Lafayette, IN

Re: Terminal coating.

Jason Roehl in Lafayette, IN

>I've used that stuff before, too. Except that I just coat both terminals liberally AFTER they're attached to the battery (and cleaned with a terminal- and post-cleaner). I'd be concerned that the coating would interfere with the contact between the terminals and posts. Oh, and I get 5-7 years out of my batteries here (grin). I've also heard that petroleum jelly works well, but I prefer the spray-on stuff because it dries and doesn't leave a goopy mess on your battery terminals. We all know that Murphy's law dictates that the next time you mess with that battery, you'll be in your Sunday Best...

Jason

Re: OT - Copper battery wire corrosion removal

#10

Dale Lenz

Re: Terminal coating.

Dale Lenz

>My exprience is you don't have to mess with your battery to get "grease" on your Sunday best, just pop the hood. Grease works but I look for other ways of stopping the white fungus, : ' >. In fact, I've got to clean a + post today. Now... where did my son leave my battery brush, or where did I leave it last, : ' >.