Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

black finish recipe

Posts

black finish recipe

#1

black finish recipe

Loren Estes

>My brother was told about a recipe of steel wool and vinegar that is used to make a black transparent stain on some woods but the person was very vague about the recipe.

Does anyone know the recipe and if it works and what woods does it work on?

Thanks for any help

Re: black finish recipe

#2

Re: black finish recipe

Bob Lang

>Woods with tannic acid in them will react. Walnut will turn jet black, but I really haven't tried it on anything else. I buy a pint of cheap white vinegar and shred up a pad of steel wool in it. I let it set 3 or 4 days in an open container. This is important as the chemical reaction forms a gas. I strain it through a cone-shaped coffee filter when I'm ready to use it. The liquid remains clear, but the wood will change color in a few minutes.

Bob Lang

Re: black finish recipe

#3

Re: black finish recipe

Dick Coers

>Woods with high tannin are the ones that work best. White oak, red oak, walnut and mahogany.

here's a good link with a recipe

http://www.joewoodworker.com/ruststain.htm

Re: black finish recipe

#4

Re: black finish recipe

HaveWoodWillTurn

>Loren, you have good info here. I've used it on woods that just wouldn't do anything but turn a dull gray. I then made up a batch of tea (yup, the kind we all drink) - I used sun tea. I dropped my hollow form into that and it instantly started turning black. Tea provides the tannin some woods - especially very dry woods - lack.

I used one steel wool pad (I've since heard that you should wash it first because it has ingredients in it to keep it from rusting) in one pint of vinegar (the cheapest you can find). I soaked it overnight, filtered it, and used it. Worked great. Have fun! - Ed

Re: black finish recipe

#5

Re: black finish recipe

Phil Joines Krum, Tx

>It has to be washed to remove the oil used in manufacturing it.

Re: black finish recipe

#6

Re: black finish recipe

Lee Ohmart

>I used a solution of ferrous sulfate to accomplish this on walnut grips for one of my 45's. It turned them jet black. Just a teaspoonful in a cup of warm water did it.

Re: black finish recipe

#7

Re: black finish recipe

mike mcnerney

>I have had good use of this formula, but what I couldn't seem to figure out was is there a way to dilute it to get something closer to various shades of gray?

Mike McNerney in Ottawa

Re: black finish recipe

#8

Re: black finish recipe

Alexander Grigoriev

>With time, the iron acetate solution absorbs more oxygen and pretty much becomes unuseable.

Here is an (almost) instant recipe:

1. Get a steel wool pad, wind some bare copper wire around it and add some water. Cover it, so the water won't dry out. In a few days (thanks to copper) the steel wool will rust completely. Now you can drain water and dry it. This rust (iron oxide) can be kept in a jar until needed.

2. When you need the solution, mix rust and vinegar. Add vinegar until all rust dissolves, should happen quickly.