Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

OT : Gas line / valve . . .

Posts

OT : Gas line / valve . . .

#1

OT : Gas line / valve . . .

SteveM

>I really, really try not to go OT but . . . As a handy / fix it type can I change the little gas valve / shut off to the heater. There is no other shut-off before the meter. Done most other things but not gas yet. Not sure its " in my relm ". Or do I call " Da Guy " ?

Re: OT : Gas line / valve . . .

#2

Re: OT : Gas line / valve . . .

Randy Johnson Connersville, IN

>I can't speak for the policies of other companies but the one I work for has never had a problem with customers shutting off their meters to do repair work. On rare occasions someone will ask us to do it, but contractors never do. To be on the safe side it might be a good idea to call and ask first. Be aware that if you have any standing pilots on a furnace or water heater they will have to be relit.

The actual job of replacing the valve should be no more complicated than installing one for water. Water is measured in pounds PSI. With a very few exceptions, gas in residential use will be around four ounces PSI. Use dope instead of tape because some types of tape are not rated for gas.

Last but not least, be sure the valve you install is designed for gas. I have been on more than a few leak calls where the valve was the problem.

Re: OT : Gas line / valve . . .

#3

Re: OT : Gas line / valve . . .

John Veerkamp

>Shut off the gas and it's not a big deal. be sure to use pipe sealant on all joints and test for leaks with liquid soap. It you can use a saw and hammer or wrenches you can do this.

John

Re: OT : Gas line / valve . . .

#4

Jesper, Denmark

Re: OT : Gas line / valve . . .

Jesper, Denmark

>If you really do not understand the problem, with gas, don't do it yourself.

If you screw up with a water valve, you get wet. With gas, the risk is much more serious.

Call your gas company for help.

Re: OT : Gas line / valve . . .

#5

Re: OT : Gas line / valve . . .

Lee Schierer - McKean, PA

>While you're at it you might want to add a shut off inside the house. Normally a gas rated ball valve is used for this purpose.

When you turn the gas back on check all the fittings you touched and those 3 or 4 fittings back from where you worked with soapy water. If you see bubbles of any size form you have a leak.

Lee

Re: OT : Gas line / valve . . .

#6

Re: OT : Gas line / valve . . .

Pete Stahl

>Also make sure when you turn the gas back on do it very slowly. Some meter have a surge valve that will shut it down then you'll need the gas company to come and fix it.

Re: OT : Gas line / valve . . .

#7

Re: OT : Gas line / valve . . .

Randy Johnson Connersville, IN

>"While you're at it you might want to add a shut off inside the house. Normally a gas rated ball valve is used for this purpose."

Although this sounds like good advice to the point of being common sense, I can't think of one home where I've seen it done in the over three years I worked for OVG. There HAS to be a shut-off valve for each appliance. But unlike water lines where a main shut-off between the meter and the bulk of the plumbing is the norm, nobody seems to do it for gas. They just use the meter. Maybe it's because the gas meter is easier to shut off than a water meter.

You would be surprised how many gate valves show up on gas lines. When I find one during an air test I shut the building down until the proper valve is installed.

Re: OT : Gas line / valve . . .

#8

Hadn't heard THAT one . . .

SteveM

>Thank you ! Sounds like I need to get this little bottle of leak detector and check the excisting valve first then go from there. Thank EVERYONE VERY MUCH ! Confidence is high now !

Re: OT : Gas line / valve . . .

#9

Re: OT : I wouldn't add any extra valves

Larry Clinton

>When I was a fairly young lad I worked for a Propane company. The propane company really didn't want any valves inside unless the customer required them. Since then I installed many HVAC systems on my second job. 90+% of all gas leaks are due to a valve leaking. Most residential service gas valves (including those in gas ranges) are made with a tapered cone with a slot or hole through it, this is fitted into a mating taper in the valve housing. A spring is installed to hold the components tightly together, and grease is normally applied to the cone to allow rotation and aid in the seal. After these are in service for a few years and are not rotated, the grease becomes hardened, when rotated on and off - a percentage of the valves will not reseal properly. If the one outside on the meter leaks slightly it will just raise your gas bill a few dollars a month, one inside may raise your insurance rates - after enough gas accumulates to cause an explosion. I always check any gas valves I have rotated with liquid soap / water mix to insure they have resealed.