Mission Bed finished
Dave Tenney
>Here is a bed I got done with a few weeks ago. The bed is Walnut...I milled all of this wood with a chainsaw mill in 2003. Trees were near Summit County Fairgronds in Ohio.
I got the design from a picture of an original Gustov Stickly bed. I made all of the tenons on the Table Saw and chopped all the mortises with an MHG Mortice chisel. Finish is Varnish-Thinner-Linseed oil and topcoated with wax.
This was my first attempt at chopping mortices...I just followed Bob Smalsers directions and it worked out just fine. It was pretty fun. I'm working on a similar twin bed out of cherry for my daughter...
I rarely post (mostly read)and am always impressed with the work you guys turn out.
Later,
Dave





