Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Threads on Jet live center? Dom?

Posts

Threads on Jet live center? Dom?

#1

Threads on Jet live center? Dom?

Carol - now in NC Nebraska

>At Indy Fest I got a Jet live center #709933. I need to know the thread size for the add on accessories. There was some discussion on SMC with Dom about this center, but this is my favorite forum so I am asking here. Aside from which, what I need to know wasn't there. So what is the thread size for this live center?

The reason I want to know is that Stu on Family Woodworking showed how to make thread-on face plates, jam chucks, etc. by using a Beal tap. So if I have the thread size and get the tap I can make my own accessories. The mini lathe is 1" x 8 and I think I already own that tap. Can't check until I get back to Arizona.

Re: Threads on Jet live center? Dom?

#2

Hi Carol

Dominic Greco in Richboro PA

>Carol,

You wrote:

"At Indy Fest I got a Jet live center #709933. I need to know the thread size for the add on accessories. There was some discussion on SMC with Dom about this center, but this is my favorite forum so I am asking here. Aside from which, what I need to know wasn't there. So what is the thread size for this live center?"

I believe that the Jet center has a 3/4"-10 threading. Same as the Oneway live center. It can use all it's accessories. I know this for a fact since I'm using several Oneway parts with my Jet live center! :>)

Does that help you out?

See ya around,

Dominic

Re: Threads on Jet live center? Dom?

#3

Re: Hi Carol

Carol - now in NC Nebraska

>It does, Dom.

Thanks a bunch!

Re: Threads on Jet live center? Dom?

#4

Re: Hi Carol

Mark Kauder, Phenix City, AL

>He is right. I happened to as Kevin from Oneway the same thing last week in Ohio.

Mark