Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

The Shelix/Byrd cutterhead

Posts

The Shelix/Byrd cutterhead

#1

The Shelix/Byrd cutterhead

Mike Schwing from Md.

>R&R'd the cutterhead on my Grizzly G0490 jointer with the Shelix head last night, after it returned from the machine shop for a bearing swap (glad I didn't attempt that on my own).

Realigning the tables was a real PITA until I realized that the straight edge my Dad gave me wasn't. Thereafter it was a piece of cake with the parallelogram design.

WOW! What a smooth cut. First thing I ran through was a very curly piece of maple with absolutely zero tearout. Very smooth, shiny surface on that maple. Then did the same thing with some mahogany that had tearout on the old straight knives - again great results!

Expensive upgrade but I think it is going to be well worth it.

Thanks for you guys who detailed the R&R process a few weeks back. I would have NEVER known there were two set screws in each hole. Never.