I have an entire house to trim and there is no way I am doing MDF picture frames around my windows, or crappy MDF baseboard.
I will be trimming my house with cherry. I like some of the designs I see in older homes in with real wood trim, but I don't care to visit 20 open houses to find the design/layout I want.
I have tried all kinds of Google web and image searches and I cannot find much.
Can anyone give me some specific search terms, web sites or books that show many various real wood trim styles?
Thank you,
David.
Every Neighbourhood has one, in Mine I'm Him.
Re: Looking for images or books for trim designs...
>David, I don't have any good photos, but I trimmed my previous house with solid red oak. Like you, I couldn't stand the idea of using the junk I found readily available. I used red oak since I loved the color.
I'm not much of a fan of the ornate, so I went the simple route. The result looked great to me and got many compliments. The people who bought the house some years later said the trim caught their eye right away. I trimmed most of the living area (kitchen, dining, entrance, bath, hallways) which included bay windows.
I had oak milled flat in two sizes, one for baseboard and one for around doors/windows. I simply cut a chamfer on one corner (with a router) for the baseboard and on two corners for the other trim. I made window sills and built up door frames from 4/4 red oak. I ordered custom red oak interior doors to round out the look.
Oh, I just found a snapshot looking from the kitchen into the dining area. It doesn't have a closeup of much detail such as the windows.
JKJ
Re: Looking for images or books for trim designs...
Re: Looking for images or books for trim designs..
Chicago Bob
>David,
The most complete book of molding profiles that I have personally used is available at: http://www.ptreeusa.com/woodworking_books.htm#1826
Complete Book of Wood Mouldings:
1,850 Profiles from the Center Lumber Collection
An invaluable resource for creating graceful interiors, this complete handbook liberates woodworkers, builders, architects, and homeowners from the limited selection of mouldings available at home centers by providing detailed information to help choose, purchase, install, and manufacture wood mouldings. Detailed instructions on the processes used to make crown, picture rail, window casing, panel, and baseboard and base shoe mouldings, and full explanations on how to cover the gap where two surfaces meet are included. In addition, profile drawings with accurate, full-size cross-sections of each moulding�many with three-dimensional renderings�show woodworkers how the mouldings will appear when installed.
No. Description Price Quantity
1826 Complete Book of Wood Mouldings $18.99
I think you will find what you need here. Good luck & good woodworking!
Regards,
Bob Haines
Re: Looking for images or books for trim designs...
You might find a profile that suits your fancy by looking at a router bit catalog. MLCS (www.mlcswoodworking.com) comes to mind. The catalogs often show an orthographic view of a stick of wood with the bit's profile cut on it. A combination of two (or more) bits can allow you to create any number of profiles.
Al
Re: Looking for images or books for trim designs...
Re: Looking for images or books for trim designs.. *LINK*
pecker
>Bosley has this selection of moulding profiles. If you go to the link, you can click on the small images to see larger versions.
In my home I used fluted casing around the windows with rosette blocks at each corner. It looks more expensive than it really was, although I used paint grade.
Re: Looking for images or books for trim designs..
David Charters
>Hi all, I am about to do the same thing. Nothing too fancy, but all I have is a router/table. I have mainly been looking at the router bits in catalogs and on amazon. Am I really going to be able to pull this off with a router instead of a shaper? Granted I will be willing to go as slow as necessary taking many passes. Maybe I should look into a beefier router (I have a Porter Cable 690 I think). Just wondering. Moulding is so expensive. It will look better and be cheaper if I do it myself, hey might even be an excuse to get a beefier router!
DC
Re: Looking for images or books for trim designs...
>>Am I really going to be able to pull this off with
>a router instead of a shaper?
David,
I'm sure someone more experienced than I will answer, but I've cut small mouldings with a router table before and it was painful. And larger mouldings require large bits which IMHO don't belong in a typical router table, at least when working with hard woods.
I did better with a 3-cutter moulding head mounted in my RAS - I cut a lot but it was all soft pine. But talk about scary. I had great holddowns but still wore a face mask, stood well out of the way, and never let my hands get close.
Remember you can easily cut even very wide coves with a table or RAS.
Also, there are shops who will mill your stock to order. That might be a quicker, easier, and safer way to go.