Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Way O.T: Hot tub heater wiring question

Posts

Way O.T: Hot tub heater wiring question

#1

Way O.T: Hot tub heater wiring question

David Sparks

>I had a guy install a new natural gas heater for my hot tub. He is a gas guy and not an electrician. The new heater has electronic ignition where my old heater had a thermocouple which required no outside power to operate. I need to run 120 volt power to the new heater for the igniter to work. There are three wires: black, red, and white. I'm not wiring it for 240 volt operation, so I will put a wire nut on the red wire. My question is this: Do I run the ground wire to the metal case of the heater? There is no ground wire in the heater, and there doesn't appear to be a ground screw. Thanks for your help with this.

Re: Way O.T: Hot tub heater wiring question

#2

That's one place

Mark Goodall - ATL - tooljunkie

>Wiring a pool or a hot-tub is the one place I wouldn't do it myself.

Happy Woodworking!

Re: Way O.T: Hot tub heater wiring question

#3

Re: That's one place

Mike Schwing from Md.

>As a hot tub owner, I agree! (but what he said sounds correct to me, then again, I wouldn't do it myself cause I don't know much)

Re: Way O.T: Hot tub heater wiring question

#4

Re: Way O.T: Hot tub heater wiring question

Eddie Pacheco: San Jose, Ca.

>There should have been a small copper wire clamp that came with the heater package. I installed a Laars-Teledyne heater and the clamp was mounted on the outside of the heater enclosurer. Yes, do secure the ground wire to the chassis of the heater. Do it on the inside of the chassis and scrape away the paint where the wire will contact the chassis. The switch on the small pront panel of the heater only switches 24v and is isolated via the stepdown transformer within the heater.

Re: Way O.T: Hot tub heater wiring question

#5

Re: Way O.T: Hot tub heater wiring question

David Sparks

>Thank you, Eddie. I thought that was how it should be, but I appreciate you confirming it. Have a good night.