What Removes Shipping Grease?
Spru
>What's the best product to remove shipping grease (Cosmoline) from a new machine?
Thanks for your help.
Knowledge You Can Build On — Est. 1998
What Removes Shipping Grease?
Spru
>What's the best product to remove shipping grease (Cosmoline) from a new machine?
Thanks for your help.
Re: What Removes Shipping Grease?
Dick Coers
>I use cheap mineral spirits from one of the box stores, and LOTS of paper towels. It never seems like I get all the residue off the machine so I give it a rub down with sawdust after I think it is completely clean. The dust soaks up the stuff in the seams and such. Blow off the dust and you're ready to go. Mineral spirits won't touch dried enamel, just don't use something like lacquer thinner. You'll have a bare steel machine if you do.
Kerosene—simply the most effective
Rod Peterson -- Ormond Beach
>Although you will get recommendations for WD-40, mineral spirits, naptha, and others, none of them come close to the ease with which kerosene does the job. You can buy quart cans of it at most big boxes and hardware stores.
I'm told there is an odorless version sold as lamp oil which you might also try if the kerosene odor is too much for you (it isn't for me, though).
As a petroleum product (the chemists on the forum can tell you how high on the cracking tower it comes from) it will also leave a bit of a film which is handy for retarding oxidation (rust) until you can get some wax down.
Avoid the really aggressive solvents such as lacquer thinner, xylol, etc., as they can go too far on adjacent painted surfaces.
Rod
Ditto what Rod said
Mike Farinella
>
Re: What Removes Shipping Grease?
Mike Circ
>First Scrape off as much as possible with a PLASTIC paint scraper. You'd be surprised how much you get off that way and how much faster the cleaning goes after that.
Then mineral spirits. Easily available, not too smelly. Oh... Lots of paper towels too.
Re: What Removes Shipping Grease?
Jay St. Peter - Southern, MD
>I agree with Rod that kerosene is the best thing. I no longer own a kerosene heater, and I sold the kerosene can with the heater. In other words, kerosene is no longer very convenient for me. I've used WD40 on the last couple things and it's worked just fine. If I needed to clean the stuff off more often, I'd keep kerosene around just for it. Since I don't ... WD40 in the monster bottles from price club. Useful for other things too. Either way, a box or roll of shop towels is a given as well as a small brush (toothbrush) to get into nooks and crannies.
Jay
The Cosmo man
Ellis Walentine
>A sadist if I ever saw one....
Re: Ditto what Rod said
Sue McLam in Orange, VT
>I ditto that ditto.
Sue
Re: The Cosmo man
Jay St. Peter - Southern, MD
>That pic must be a few years old. Based on some of the newer tools I've gotten, I'd say the cosmo man has moved on from a brush to a mop as an applicator.
I think they just dunk the machines now.
Ellis Walentine
>
Mineral spirits, any petrolium solvent.
Forrest Addy
>
Fire, Just set it on fire, its like magic....
Barry Irby
>Put the machine near or in your lumber stack and set it on fire. The cosmoline will burn off in a flash and you will have a nice clean machine. Don't worry, it burns so fast that it will not hurt the painted surfaces or even the paper labels. The temperature of the burn is so low that it won't ruin the oil in the bearings and it will not ignite any of the lubricants that were put in critical places.
PS, None of this is true. It will set the lumber on fire and your shop will burn down and if you live, and can afford it, you will get a whole new shop with all new machines coated in cosmoline and you can start again with paper towels and kerosene.
Re: Mineral Spirits
Yonak
>A gallon of Wal-Mart paint thinner is $1.00 cheaper than Home Depot around these parts. By the way, isn't paint thinner at $5.49/gal. the same thing as mineral spirits at $8.49/gal.?