Simple hall table
Mike Schwing from Maryland
>This is the first piece of "furniture" or anything like it that I've built in a very long time, so I started very simple, and it was a good thing. I had a lot of trouble with the recess at the top of the aprons/skirts, first screwing the cut up on the bandsaw and then with 45 degree angle and handplanes until I made myself a jig that would cut them perfectly with a medium sized Lee Valley shoulder plane.
I used the plans from the DIY network's Woodworks show, and modified them to fit the dimensions appropriate for our hallway, where it will reside. Mahogany base/aprons/skirts, maple top with walnut butterfly inlays. Finished with hand applied shellac and rubbed with 0000 Liberon wool and orange oil/beeswax. Now I'm ready to tackle a bigger project, and cut the lawn, too. This was a good memory jogger. Comments welcomed




