Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Messing it up... on purpose!

Posts

Messing it up... on purpose!

#1

Messing it up... on purpose!

doug f, san clemente, ca

>I've got a customer that I've built a pine sideboard for to match her existing dining room set. She's decided now that she wants it "distressed". I've never "distressed" a piece (not intentionally, anyhow) and I wanted to draw on the more experienced here to see how it's done. Hammers, chains, ice picks, rocks?

Thanks for the help.

Doug

Re: Messing it up... on purpose!

#2

.20 gauge from 20 feet will help, too

Mike Schwing from Maryland

>All the above plus shoot that sucker with some number 9s. They look like worm holes. Stick the tip of a black marker in the holes for added effect.

Re: Messing it up... on purpose!

#3

Seriously?

doug f, san clemente, ca

>

Re: Messing it up... on purpose!

#4

Re: Seriously?

Don in Central Illinois

>I haven't done it (on purpose either) but I remember a TV show one time that laid some burlap on the table and then hitting it with a short piece of log chain. Seems the burlap kept it from becoming 'too distressed'. Good luck.

Re: Messing it up... on purpose!

#5

Absolutely

Mike Schwing from Maryland

>I've hit the legs of an old table I made from American chestnut barn boards with a blast. A .20 gauge doesn't have that much power behind it. Test it on a similar board first to get your distance right. It makes nice random holes. Number 9s, skeet loads, are about the perfect diameter.

Re: Messing it up... on purpose!

#6

Hire a moving company...

Lee Schierer - McKean, PA

>I've never done it, but I've seen it done. a length of 1/2 or 3/4" chain with various botls and studs screwed in along the length. You beat the top, sides and legs with the chain with varying degreees of force to get the desired level of distress.

Or....just ship the unit from your house across state and back with any local moving company.

Lee

Re: Messing it up... on purpose!

#7

Rolling Rock

Joe Pack

>No, not the beverage, the actual rock. An irregular baseball size rock with just a few ridges or so rolled across a surface will do the trick. Experiment on a piece of wood the same species as your project. If the distressing is too sharp, place a handkerchief or piece of old dress shirt material between the rock and wood to soften the distressing. A bit of burnt umber (or brown shoe polish) rubbed over the marks and immediately wiped off will "age" the distressed spots.

I like the rolling rock better than hitting because you can more easily control depth of penetration, and you can accurately put the distressing exactly where you want it.

As for the 20 gauge, the Winchester Model 12 I inherited from my dad would tear a board apart at 20 feet. With his magic gun, you would need more like 20 yards. Heck, if the stories my dad told me about shots he made with that gun are true, you could probably knock down a shed wall at 100 yards using nothing but bird shot! It MUST be true...my dad would never lie about a thing like that, especially while sitting on the front porch of Uncle Bills' cabin in the "head of the holler," swapping tales with his brothers at the family reunion.............Thanks for giving me a reason to remember.

Re: Messing it up... on purpose!

#8

my distressing tool

Michael Dresdner

>Here's a shot of what I use. It is a turned piece that fits comfortably in my hand. The top is festooned with an assortment of screw eyes, nails, and and other hardware that makes a variety of different distressing marks. You roll it or strike with it depending on how deep you want the marks, but remember to add damage only to where it would normally occur or it will look phony.


img

Re: Messing it up... on purpose!

#9

JL

Re: Keys also..

JL

>Hit it with a key chain or key ring full of keys. I like Michael's distressing ball though. Great use for an old softball.

Re: Messing it up... on purpose!

#10

Re: my distressing tool

Mike Schwing from Maryland

>I love it. Reminds me of a trip I took to Maine with my folks as a kid. My Dad and I were wandering around outside a shop somewhere while Mom was inside and around the back we found an old guy woodworking. My dad asked him what he was making and he answered "making antiques!" Of course my dad said "antiques? How's that?" He responded "They will by time I'm done with them."

Re: Messing it up... on purpose!

#11

Re: Rolling Rock

Mike Schwing from Maryland

>Well I do load my own, a little light for skeet, too. But 20 feet would do just about fine really. So would the freight company that recently shipped my new speakers..argh.

Re: Messing it up... on purpose!

#12

Re: Messing it up... on purpose!

George@Colonel's Workshop-Havertown PA

>Good Afternoon Doug,

After all that painstaking work, the customer wants it distressed? That is distressing. I'd take Mike's shotgun and shoot the customer with it. Damned if I'd ever do that to something I built or restored. Not that I am against distressed furniture, but I feel those gouges and marrs are badges of family history. They have to be natural wear or regrettable, lamented accidental damage to earn any charm. Pine will get beat up soon enough. Tell her to inflict her own damage.

George

Re: Messing it up... on purpose!

#13

Another method I heard of

Eddie Pacheco, San Jose, Ca.

>I sold a piece of equipment to a fella that had a shop that made windows, doors, window trim and furniture pieces. He told me that he would have a friend with a small skip loader dump pea gravel on the piece form an abritray distance. They would place the door or other pieces on the ground and the skip loader would drop a bit of gravel at a time. He said it worked well and was random.

I'm kind of with Colonel (except for the shoot the cuctomer part) as to pre-aging stuff. It seems like a waste of good workmanship.

Re: Messing it up... on purpose!

#14

Got a Truck ?

Scott in Eastern Iowa

>

Re: Messing it up... on purpose!

#15

Re: Keys also..Ditto

Barry Irby

>I used to have a collection of big old keys on a stout ring just for this. I some point I made barn board furniture and picture frames. The weathered lumber really did not look "right" after being cut and planned. I beat eh heck out of it with those keys, and chains, and anything else I was willing to throw at it. I also have a huge rasp, must be 18 or 20" long and I have used that to knock a couple of corner completely off. I rounded drawer fronts as if hands and worn down the edges. Once in a while, I aged things to death. There was little or nothing left.

Re: Messing it up... on purpose!

#16

Re: Rolling Rock

Joe Pack

>Don't mind me, Mike. I'm just bragging about the gun! :-)