Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

PVC for compressed air line runs.!?

Posts

PVC for compressed air line runs.!?

#1

PVC for compressed air line runs.!?

Ray Carson, Lawrenceville NJ

>Not for me!

Somebody I work with said he was going to do this and I told him he was nuts. I've read lots of literature on this and the manufacturers of the PVC piping even recommend not using PVC for pressurized loads like air.

Now....I know the gang here at WC has some thoughts on this one. What's the group consensus on this topic.

Ray in NJ...staying clear of my co-workers garage

:-)

Re: PVC for compressed air line runs.!?

#2

Re: PVC for compressed air line runs.!?

Gary Camp Bend, Oregon

>Hey there Ray, I think you can find a lot of comment on this in the archives, it comes up periodically. Bottom line for me is this, water under pressure contains virtually no stored energy, air under pressure contains a bunch. Jerry Klug, who commentted on the pinhole in a compressor tank may have further comments on this. I asked him a question about boilers one day (He happens to inspect the boilers and pressure vessels where I work) about why a boiler was rated 50 psi for water but only 10 psi for steam. He had a two word answer "Stored energy". Hi Jerry nice to see your name here.

glc

Re: PVC for compressed air line runs.!?

#3

Re: PVC for compressed air line runs.!?

Rob Stokes in North Vancouver

>Absolutely positively not!

I've told this story before - but not for a while, so here goes:

I was working in an automotive shop year ago where the owner ran PVC compressed air lines to save a buck. They worked great for a couple of years - no trouble at all. Fast to install, easy to change and we actually had a pretty good sized "web" as it was cost effective to put it together. nothing like having air where you actually need it!

But one day the two of us were working on something and he threw a hissy fit, throwing a basic (9/16 ish) combination wrench on the process. The next thing I know I'm on the ground, my ears are ringing and my face hurts. A quick check of my face with my hand ended up with my hand covered in blood.

After picking myself up and cleaning myself off it wasn't that bad. One of the air line drops must have been hit by the wrench and it had obviously and completely exploded. It was gone, as in absent - as was about 2' of the main line on either side of the "T" fitting. So maybe the wrench hit the "T" - I'm really not sure. My face was absolutely peppered with small cuts, none of them deep, but all of them bleeding a bit. With the exception of a couple of pieces, none of the PVC stuck in the skin and that which did was easily removed by me with some needle-nosed pliers. Not one shard hit my eye lids nor my eyes. Not one. And the ringing in my ears only lasted a short while and then it was over too.

The boss was on the other side of the car - he was completely missed.

After that the PVC came out and was replaced with iron pipe. Never had a problem after that and there was more than one more wrench thrown. I had no lasting effects and the episode has been chalked up to "hmm - learned something".

Hopefully you can convince your co-worker to switch to a more appropriate material for his air lines. If he doesn't - I suggest very strongly that you self-revoke all visitation rights to his shop. I know I'd never go anywhere near it.

Rob

Re: PVC for compressed air line runs.!?

#4

Re: PVC for compressed air line runs.!?

Jerry Klug

>There is a grade of plastic piping that is made for pressure applications and will not embrittle but it is usually only available at industrial piping suppliers. The piping at the box stores and the local hardware is VERY UNSAFE to use for delivery of compressed air. It will become brittle and when it does let go, the shards of piping that are propelled through the iar are like high speed darts. The release of kenetic energy from the rupture or the air line can cause a lot of damage too. In Bellingham, WA in 1991, a metal commercial building had the entire wall of the building blown out from a 4" PVC air header that supplied drops for work station air hoses when it ruptured. It looked like a bomb went off. I realize that most people would use 3/4" or 1" pipe but the damage could still be great. Best is to stick with A106 iron or galvanized pipe with air hoses from the drop connection.

Re: PVC for compressed air line runs.!?

#5

Tell Him

Mark Mandell - Gone Round In Jersey

>To pay up his life insurance and keep his family out of the garage!!

You can also tell him that OSHA PROHIBITS the use of PVC pipe for pressure gas or air with the reason being that more than enough people just like him have been killed and maimed when the stuff exploded in shrapnel, without any warning or physical injury to the pipe. In case he asks, pressurized water doesn't explode pipes; it just leaks. If he reeeelly wants to use it, he must sheath it in steel pipe to contain the debris when it lets go.

Re: PVC for compressed air line runs.!?

#6

Just say no!!!!!!!

Lee Schierer - McKean, PA

>

Re: PVC for compressed air line runs.!?

#7

Re: Tell Him......some people just won't

Ray Carson, Lawrenceville NJ

>listen. I've read enough here and in the archives. We can stop the thread now.

Thanks for the back up on this one.

Ray

Re: PVC for compressed air line runs.!?

#8

Hey Ray, you ever solve that water issue?

Tim Greif - West of Chicago

>I recall you had a severe phantom amount of water disappearing every day. You ever get that figured out or am I thinking of someone else?

Re: PVC for compressed air line runs.!?

#9

Pipe

Mark Mandell - Gone Round In Jersey

>Hey, Jerry,

I use type L copper (rated to 700+ PSI) to avoid the rust and scaling issues with steel or galvanized. Were I in an industrial setting, 106 steel would be the choice, but for a home shop and garage this copper should be sufficient. I'd like to hear any opposing view.

mm

Re: PVC for compressed air line runs.!?

#10

Rick L

Re: ABS plastic is the only rated plastic *LINK*

Rick L

>for airlines. Kaeser has aluminum piping and also a company called www.garage-pak.com has an aluminum air line. None are cheap but they make up some of the difference in speed of running the lines.

http://us.kaeser.com/Products_and_Solutions/piping/pipe.asp


Plastic air lines

Re: PVC for compressed air line runs.!?

#11

Does he have his will completed ?

Scott in Eastern Iowa

>

Re: PVC for compressed air line runs.!?

#12

Re: Pipe

Jerry Klug

>Mark,

Copper is very good for air lines and easier to run than A-106 steel. My experience with copper was not that good. For an air supply to my garage from the shop air compressor at a previous home, I ran copper underground. Not a good choice as either a stone damaged the line or it rapidly corroded as the garage line only held pressure for a few months. I have inspected many above ground air lines at commercial sites and don't recall any properly sweated copper systems having leaks.

Re: PVC for compressed air line runs.!?

#13

Re: Pipe - Underground

Mark Mandell - Gone Round In Jersey

>I'll (almost) bet you didn't use type K, cast fittings, and parge the pipe, eh?

Jersey and several other States got this nifty idea to allow type M copper (hot water heat line stock) for residential pressure water lines. Stuff has been pinholing for the last 10 years. I literally repiped my entire home; well to faucets; got tired of applying patches.

mm