Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

I'm Spacing Out!....Literally! (long)

Posts

I'm Spacing Out!....Literally! (long)

#1

I'm Spacing Out!....Literally! (long)

Thomas Skaggs, Foothills of Mount Level

>So like most anyone I started the whole woodworking thing as a hobby. I was your typical garage workshop guy which if you live in a northern state usually means the tools get covered for the winter and moved to the edges to park the cars out of the snow.

A few years of that really stunk so one day I take the plunge and build a heated workshop onto the back of the garage. Being a city dweller the shop couldn't be really big...zoning. But I managed to build a 20'X 21' space and life was good. Gas heat and a window A/C and I was a 365 woodworker.

So with a real workshop I got some "real tools" and went to town teaching myself the craft and enjoying every minute of it. I figured a bunch of years down the road I'd retire and spend my new found free time making furniture and maybe selling a piece every now and again.

But a funny thing happened on the way to retirement. My skills and passion for woodworking accelerated faster than I expected. Before I knew it I was waist deep in the world of professional woodworking and I haven't even reached retirement yet! No problem...well ok, time management is a challenge. But why let a little candle burning at both ends stand in my way?

But while time management was a predictable challenge the one problem I did not see coming was that of space needs. The cozy but quite sufficient space I had created for my hobby soon became an ever shrinking workshop of claustrophobic proportions. Once I shifted to the world of "professional" I found it necessary to be working on 3 or 4 projects all at the same time. I acquired a couple of larger tools too.

Well push finally came to shove and this past summer. I busted an opening through the common wall of the shop and garage and I stole 100sf of garage space and created an addition to the shop. 100sf may not sound like a lot but trust me, what it did for my infeed/outfeed abilities and extra elbow room seemed like a huge help.

So that's it? I have addressed my space problems? Not hardly! Since making woodworking a business I have come to find out about all kinds of space issues that I never faced as a hobbyist.

Lumber...as a hobbyist I collected a little lumber here and there when I found a good deal. But mostly I bought lumber as I needed it for projects. Storage wasn't plentiful but I managed ok. Nowadays, I find it smart to buy lumber in larger loads when the price is right as good business practice. And since I generally travel to buy lumber it makes sense for me to buy larger loads. It helps to have a wide variety of woods on hand to handle any project that might arrise. So now we are talking about thousands of board feet! Where do I put it all? I have some in the shop, some in the garage, a bunch in the basement and a lot of it in a rented mini-warehouse. It's everywhere I tell ya!

Furniture...As I prepare for shows or gallery shows I will build 10 or more pieces of furniture. They need to be stored somewhere safe until the shows. But where? Yep...throughout my house. My living room and family room are often "way over furnished". In fact the living room (which we don't really use all that much) looks more like a furniture warehouse lately. My wife claims it's a vacuuming nightmare....I feel somehow responsible.

Photography...Not having the money to hire a professional photographer leaves me in the position of shooting photos myself. And with furniture what does that require? Space! And lots of it. A 10X20 backdrop, lights, diffuser screens, tripod etc. It requires me to push all the family room furniture to the walls from time to time to set up my "studio". Of course afterwards I need space to store all that stuff while not in use...the attic and basement of course.

I need space to store my show booth lighting and pedestals. I need space to store all my scale drawings of my work. I need space to store my promotional materials. Do you see where this is going?

So what's my point? I really don't have a point. I'm writing this mostly for therapy reasons. Sure, living in the country where I could build an enormous pole building would be the obvious answer. But for now we are commited to being city dwellers. But down the road when retirement comes (see...I keep talking about retirement) then we'll give relocation more thought.

Anyway, for any city dwellers like me, if you are considering taking woodworking to a business level, consider yourselves forwarned!! ;-)

Ahh...I feel better already. :-)

Tommy

Re: I'm Spacing Out!....Literally! (long)

#2

Re: I'm Spacing Out!....Literally! (long)

Jim Shaver - Oakville, Ontario

>Tommy..

Kansas........

Are you saying you are a victim of your success.....:-)

Ah the sweet sorry of accomplishment.....Build UP Tommy...

Take care,

Jim

Re: I'm Spacing Out!....Literally! (long)

#3

Re: I'm Spacing Out!....Literally! (long)

Jesse in New Mexico

>That living room that you hardly use wouldn't be adjacent to the shop would it? heh, heh, heh...

Re: I'm Spacing Out!....Literally! (long)

#4

Alan Young

You have enough space-just use your tools better..

Alan Young

>Specifically the SHOP Vac and Get a Vacuum Press.

Between these two tools you can adjust your shop size or project size.

Shop not big enough? Attach a port to all the walls for your shop vac- Turn it on Blow and the shop will expand to give you more room whilst working on the really long table...

Or if you prefer,, put the table in vacuum bag and turn it on high till it shrinks down to a manageable size...

C'mon Tommy - you are a Facilities Planner you can figure this stuff out!

:^)

Alan

Re: I'm Spacing Out!....Literally! (long)

#5

Re: You have enough space-just use your tools bett

Thomas Skaggs, Foothills of Mount Level

>Then I'd truly be able to say that not only does my shop "suck" but it "blows" too!

Tommy

Thanks to Bart Simpson for that line. ;-)

Re: I'm Spacing Out!....Literally! (long)

#6

Re: I'm Spacing Out!....Literally! (long)

Thomas Skaggs, Foothills of Mount Level

>No, but even if it did I would be risking crossing one too many boundaries that might upset the very time/space continuum that keeps my marriage intact. ;-)

T.

Re: I'm Spacing Out!....Literally! (long)

#7

Solution

David Yoho

>Alan and I, being the good guys we are, would be glad to help with your space problem. We'll be glad to store the lumber for you. That should relieve some of the congestion. Then whenever you need some - just call BR549.

What do you think Alan? You up for helping a friend in need out?

David

Re: I'm Spacing Out!....Literally! (long)

#8

I feel your pain

BobS

>I started the same way with a hobby shop of 400 sqft behind the house, then went full time in the same space for 4 years. The first expansion added 300 sqft of space which I outgrew in about 1 1/2 years so now we are adding another 200 sqft (max allowed by the city) for a total of 900 sqft. It is still too small even though I also use a one car garage for veneer/lumber/finished work storage. Pretty soon I am going to need to move to a commercial space but I'm really not looking forward to the increased overhead. I dream of moving to a country location to raise the kids and have as large a shop as I can build but it will never happen, how can I beat three Starbucks within a mile of the house.

I do save some space by hiring a pro for photos, I would highly recommend this even if you think you can't afford it, the boost to the quality of your portfolio is worth the cash outlay. I also don't do any finishing in my shop. Hired out to another professional and once again the quality is worth the expense (sprayed only though).

Finished goods storage is the hardest part, where to put expensive work for a couple months until needed.

Good Luck,

Bob

Re: I'm Spacing Out!....Literally! (long)

#9

Alan Young

You pick "im while I'm a grinnin!

Alan Young

>

Re: I'm Spacing Out!....Literally! (long)

#10

Re: Solution

Thomas Skaggs, Foothills of Mount Level

>David,

I see right through you! You dirty rat! But the joke is on you. You would not want my lumber. Most of it is defective stock. Virtually none of it is straight grained wood. I'm afraid that most of my cherry and maple is afflicted with really wavy figure. I think some refer to it as "curly". So I would have the last laugh!!

Tom

Re: I'm Spacing Out!....Literally! (long)

#11

Re: Too Late!!

Ron Hildreth, Alta, Iowa

>I, too, have nearly all the same problems, add one more. I still hold down an eight hour a day job that, with weather changes, can mean sixteen hour days during the winter! I've been dealing on a 25' x 90' building uptown,(photo below) but found out the other night the present owner might not be ready to move out for another two years! Started looking again for something else, but just nothing that fits my needs in the area, without a huge investment, a long way out of my ball park.

Ron in Iowa


img

Re: I'm Spacing Out!....Literally! (long)

#12

Some cheese and crackers with your whine Sir?

Dave Anderson NH

>Geesh Tommy,

With a mind as creative as yours and the specialized design training you've received the answer should be obvious. With the addition of a second floor to the shop you'd have an office with a view to use for design, drawing storage, promo materials, and even your bench and hand tool work. It'd mean a hassle for a while with the construction being done, but the benefits would be really great and then you wouldn't have to worry about moving or disturbing domestic tranquility. Many remodeling firms could do the structural and framing work in just a few days and you could same money by doing the interior work yourself.

It's just a suggestion, but if I remember the old Pond pictures of your shop, it would solve a lot of problmes "relatively" inexpensively.

Re: I'm Spacing Out!....Literally! (long)

#13

Could a toy trailer solve some of the problem?

Charles Sharp

>

Re: I'm Spacing Out!....Literally! (long)

#14

Re: I'm Spacing Out!....Literally! (long)

Thomas S Stockton

>Tom

Truth is no matter how big your shop is you will find a way to fill it up. Storage is a pain I end up keeping wood on hand to a minimum if possible because it takes up the most room and since my shop is round it doesn't fit well against the walls.

Tom

Re: I'm Spacing Out!....Literally! (long)

#15

neighborhood assoc. might not like it?

Thomas S Stockton

>

Re: I'm Spacing Out!....Literally! (long)

#16

Well Dave, it's like this.....

Thomas Skaggs, Foothills of Mount Level

>....that thought has crossed my mind a few dozen times. I think the idea has real merit...that is if I knew I'd be living there for quite a while longer. Property value-wise I probably would not get much return on the investment. But if I were to gain use of it for long enough then I could probably justify it as purely a business cost.

I have 1 1/2 years at U of I until I reach a benefits milestone (not full retirement however) but my plan is to take the pulse of my furniture business then and try to make some long term plans. I figure that will be the time that I address the shop situation. Until then I'll probably keep the whine flowing!

But yes, you are correct, in theory upward is the only direction I can go!

Tom

Re: I'm Spacing Out!....Literally! (long)

#17

Re: Well Dave, it's like this.....

Dave Anderson NH

>Hi Tommy,

If you look at it from the standpoint of an investment in the property value and expect to get a return you are probably right. If you look at it from a standpoint of convenience, quality of life, and an enhancement of your ability to expand your woodworking it does make very good sense. In a sense it's sort of like a built in swimming pool, not great from an investment standpoint in a northern climate, but sure nice on a hot humid summer day. My guess is that you'll analyze this for at least another year and then hit us unexpectedly with the announcement of a major shop expansion.

Re: I'm Spacing Out!....Literally! (long)

#18

Dave....you just made matters worse!

Thomas Skaggs, Foothills of Mount Level

>Darn....now I have to figure out how to expand my shop AND build a swimming pool. Perhaps kill two birds with one stone? Tell me, can a pool filter remove sawdust?

Tom

Re: I'm Spacing Out!....Literally! (long)

#19

Re: Yes, but...

Glenn Madsen near San Francisco

>that isn't where sawdust is supposed to go. That's what compost piles are for.

Re: I'm Spacing Out!....Literally! (long)

#20

Re: Heck Tommy

Larry Clinton

>I am retired, don't do any work for money (do get a lot of "can you repair this please" from family and friends). I am out of space and selling some seldom used equipment to my Nephew just to quit tripping over it. My son & I built my retirement shop about 3 or 4 years ago. I built a 30 X 30' shop with 10' ceiling and had the trusses designed so I have a 10' X 30' - 8' ceiling upstairs room. I have the upstairs room crammed with lumber, Walnut, cherry, oak, poplar, ash, locust etc. (a bit of it is figured too). I had to leave the last auction I attended before they sold several stacks of lumber as I have no more storage area. I've been thinking about building another small storage building in the back yard just for more lumber. I don't think the average person will ever have enough room.

Re: I'm Spacing Out!....Literally! (long)

#21

Alternate solution ...

Ian (in Sydney, Australia)

>take over the house and live in what is now the shop / garage???