Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

So, about a 5 hp saw....

Posts

So, about a 5 hp saw....

#1

JL

So, about a 5 hp saw....

JL

>I've had the saw up about a week now and used it for cross cutting and ripping.

To date all of the cuts have been uniformly good. I'd been cutting on my old Craftsman for 20 years or so. I've used various 3 hp cabinet saws (Powermatic, Unisaw and Grizzly) on occasion. There is definitely a difference between the 5 hp and my old anemic Craftsman (maybe 1.5 hp on a good day). There is a difference between my 5 hp and the Grizzly 3 hp that my friend Mike is using.

The only real "complaint" that I have is that the interior (motor) compartment doesn't "shed" the saw dust as well as I'd like. I'm usually running my cyclone while cutting. There always is some residual saw dust in the interior compartment. This may be due to the door and the vents in the door.

I figure that I can wax the interior compartment - relatively easy fix, though I don't know if it is worth it. My other thought is to put weather stripping on the compartment door and possibly block off the door vents. Probably not a good idea - but as I'm running the cyclone, would it matter? The cyclone should provide enough air circulation to cool the ambient air. Any thoughts on the matter? It isn't a large amount of saw dust.

Re: So, about a 5 hp saw....

#2

Re: So, about a 5 hp saw....

Rob Stokes in North Vancouver

>Is the dust causing a problem? If not, I'd leave it. the piles will eventually find their own maximum size. You're serious about waxing the interior of your table saw? Man - that's dedication! Or at least it's something.... :)

Residual dust means it fell out of suspension or it never was in suspension. Inside a closed cabinet that usually means there's not enough air moving so sealing the door etc. may have an effect opposite to that which you expect. Instead, you may want to try making up a temp. insert with more holes in it and see what else you can do to get a larger volume of air passing through the saw body (and causing turbulence within it).

Rob

Re: So, about a 5 hp saw....

#3

cool the ambient air?

Rod Peterson -- Ormond Beach

>> The cyclone should provide enough air circulation to cool the ambient air.

I was unaware that the DC had a “cool the…air” component to it. Are you having a problem with air temp inside the saw? After all, there must be thousands of cabinet saws running without any DC at all.

Rod

Re: So, about a 5 hp saw....

#4

JL

Re: cool the ambient air?

JL

>I am presuming that sealing up the vent holes would interfere with the air circulation needed by the TEFC motor. I figured that the air exchange provided by the cyclone sucking air from the insert holes (and saw slot) across the motor would mean that I didn't really need the vent holes.

Re: So, about a 5 hp saw....

#5

Re: cool the ambient air?

Mark Mandell - Gone Round In Jersey

>JL,

You're going to be "starving" your DC's impeller if you cut down in the cabinet openings. Impellers work very differently from compressors even though you feel what seems to be vacuum on your hand if you cup it over the hose intake. Cut off the airflow and your DC winds up beating the air around inside itself.

If your DC pulls on a 6, 7, or 8" intake, it will usually be most efficient and do the best job if the air intakes are the same diameter. If you cut off air flow through the saw's cabinet, you reduce the DC's ability to move the air which, in turn, moves the dust; more air moving (to the limit of impeller) translates to more dust moving. If you want better dust extraction from your cabinet saw, enlarge the draw port rather than decrease the inlets. Change the hose connection to 6" from 4" and you'll be amazed at the difference; even better if you hard-pipe the DC all the way to the saw cabinet instead of using flex hose. With its ridges and such, flex cuts down on efficiency.

I kept my saw cabinet at a 4" draw, because I added a 3" draw in an overarm guard/collector. With the combined draw, there's very little dust either on or under my saw after a cut session. If I didn't have the upper arm draw, I would have converted the cabinet to pull more air.

mm

Re: So, about a 5 hp saw....

#6

JL

Re: cool the ambient air?

JL

>OK. I won't block the vents. Durn - I'd rather not mess with the pretty 4" opening on the saw though. I can duct some 5" or 6" hose from the my ceiling drop (and 6" blast gate) down to the saw.

Do you think having a 4" reducer at the end of a 5" or 6" hose run would cut the flow that bad? I can make the hose run about 6' or so. I'll try shortening the existing 4" hose first. I've got way too much on it now.

Re: So, about a 5 hp saw....

#7

Re: 6" take-off

Mark Mandell - Gone Round In Jersey

>It's actually easy to cut in a 6" HVAC steel take-off that your piping will slip over and cover anyway. Because air compresses, the 4" restriction will not have the same effect that it would have on water flow in a pipe, but it will still cut your flow down somewhat.

The other thing you can do is cut in a 2nd 4" port and then connect each to your 6" line separately or through a 6x4x4 fitting. A 6" line has a cross section of about 28 sq" where the 4" is about 13, so 2 4" ports will get you close to your main's capacity.

mm