Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning to ya

15 Oct 2007

I hope this posting finds each of you in good weather and dry shops.

It's raining here today and I sure could have used a nice dry day to get more finish sprayed on this kitchen table. Here's the top with a partial finish on it:

Photo Sharing and Video Hosting at Photobucket

What I learned in making this piece is not only about making your own curved work but that doing a "brick-stack" method for making curved work is less wasteful and the curved piece is more "stable" (meaning no spring-back). I made my own veneer for the arches of the table so that I would have a very good match of wood grain and color. Here is what the table base looks like:

Photo Sharing and Video Hosting at Photobucket

I'll share some very important tips with you that I learned on this project (no, it's not done yet, but it's ever so close to being done):

1. Always make a Full Sized Pattern of your curved work.

2. Always include straight and 90� lines on your drawing for best reference when cutting joinery for the curved pieces.

3. NEVER throw away your Full Sized Pattern...well, at least not until the project is completely assembled and ready for finish.

Saturday was work at the day job and practice my music for Sunday at church. Then it's time with the family and just generally being lazy Sunday afternoon and evening.

Today? It's out to the shop (after I get done with a conference call for the day job) and start staining 6 chairs made from Malaysian Parawood that my customer purchased at an unfinished furniture store. I have no idea how this will will "color" nor take finish, but I guess we'll see.

So what did YOU do this weekend??

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Alan Young

Let There be LIGHT!

Alan Young

>First- Dennis,that table is looking quite attractive....looking forward to the finished posting!

After 12 years in the dark dungeon basement I put up four shop lights in the Carriage House. The building is unheated and there is no electrical service. My hook up is just a chord running to the shop through a mouse hole opening in a rotting door but it serves a purpose!



Wow - all this head room! I'm gonna get spoiled!

This will be the new stageing area for projects as they get too large for comfort in the main fabrication shop space in my basement,

Still no insulation or heat but this will improve the fabrication and finishing logistics .Alan

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis and a Happy Monday,

My daughter and wife lugged the chest-on-chest into the dining room for inside storage pending photographs and removal of the bedroom furniture it will replace. I was at loose ends, so decided to repair two damaged dining roon chairs. Got one of them done. The second requires a new back stile and lots of precise mortising. Sunday I loaded my 8 foot Hargrave bar clamps into the truck to get them to their new home: my #3 son's shop. I retained two for my own needs, which will be infrequent for sure. Eight feet is a lot of clamp. I love the curved table, Dennis. Very well done. I'm sure you will receive lots of compliments. Have a great week.

George

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

David C. Lykins - guitardude - Dallas GA

>Got most of my shop wired and can now at least run some of my stationary tools with out dragging out extension cords. Maybe soon I can start to work on and finish some of the projects I was unable to finish while my shop was down.

Still got to wire some additional 120VAC outlets and get my 220VAC wired up for my tablesaw. But things seem to be coming along somewhat better than expected.

Besides that I went to a Family reunion and air show this weekend.

Re: WC Weekend Accomplishments.....

#5

Practice Boxes

Tom Pilsbury

>I'm planning to make a nice incense box probably from Maple/Walnut/Cherry but wanted to go through a dry run first with materials laying around the shop. You know, kinda get all the mistakes out of the way now. Made these 2 from pine, walnut, mdf, plywood, poplar. Turned out good enough to give to non woodworkers. And, most importantly, it was a learning process for my next project.


img

Re: WC Weekend Accomplishments.....

#6

Re: WC Weekend Accomplishments.....

Jay St. Peter - Southern, MD

>Went to the Richmond Woodworks show on Saturday. The show was small. I wanted to check out some of the newer equipment, but there was little to be found. No Steel City, no Work Sharp, no Domino, heck no Delta/PC/DW.

But, the show wound up being awesome anyway. I got to see Frank Klaus demo some dovetail cutting and other interesting stuff, Glenn Huey building a side table, and Mike Jurnigan making some chairs old school. Smaller crowds than the DC area shows I've attended meant I actually got to talk to those guys a little. Those were the first dovetails I've ever seen done (other than a few of my own mediocre attempts). As I was heading out I ran into David Yohoo and had a nice conversation. Unfortunately I had to cut it short to be home with the kids before my wife went to work. I only walked away with a Kreg bench clamp and a couple pieces of curly maple.

Sunday I cleaned my shop so I could use it to cut some wood to build out my front door frame for a storm door. It's primered and ready for me to paint the entryway next weekend. Hopefully that will take one more off the partially completed jobs list.

Jay

Re: WC Weekend Accomplishments.....

#7

Re: Practice Boxes

Ken Oakley-Sunny St. Cloud, Fla

>I hope that isn't blood on the surface under the one with the open lid.

Re: WC Weekend Accomplishments.....

#8

D4R - Practice

Bartee ( Metro Atlanta )

>I spent about 4 hours learning how to do half blind dovetails with my D4R.

They really do mean for you to tighten ALL of the set screws. If you don't they screws will vibrate and fall out when you turn the fingers over.

Make sure the fingers you are using are tight. One slipped.

A black sharpie is good for getting the lineup line to show up.

I am 6'2" tall. The jig really does need a box to get it about 6" higher off the bench top.

I have a VRS thingy on order. The jig really needs a vacuum hooked to it.

So any time in the shop is a good time. I am getting there and learning how to work with the jig. I am sure this is going to be an excellent tool.

I also keep looking at the Grizz 0441 Cyclone sitting in the floor. I priced out the pipe and fittings at McMaster-Carr. About $500. That's next after I get this table completed.

Re: WC Weekend Accomplishments.....

#9

Re: Practice Boxes

Tom Pilsbury

>Nah. Just spilled some shellac.

Re: WC Weekend Accomplishments.....

#10

Barb Siddiqui

Re: WC Weekend Accomplishments.....

Barb Siddiqui

>I finally got a Saturday off and bandsawed two chunks of apple trunk for turning squares. Tried to use a small one to make a little spoon (spindle turning) and got so carried away with the beautiful, graceful ribbons of green wood lathering off the workpiece that my bead round over was too deep and cut right through it. Wow green wood is fun. More blanks to practice on....

Re: WC Weekend Accomplishments.....

#11

Re: WC Weekend Accomplishments.....

Mike Fitterling

>Didn't get much done this weekend. Andrea headed up to Manhattan for a wedding with a friend of hers and I got our kids and her friends daughter for the weekend! I did manage to sneak in a little time in the shop and at least got started back on my G. Stickley MOrris chari I had begun a few years ago.

Re: WC Weekend Accomplishments.....

#12

Re: WC Weekend Accomplishments.....

Terry Quiram

>With the help of my wife, son and neighbor we installed Oak hardwood floor in our dinning room. YEA almost done with the remodel. If I ever install hardwood floor again it will be too soon.

Terry