>This morning my wife and I drove over to the Richmond WoodWorks show to pick up the walnut picture frame I'd entered in the Instant Gallery at the SawDust Caf�. As we walked around the show floor, I introduced her to several of the notable craftsmen I'd met there over the weekend. Mike Jurnigan was nice enough to take some time out to show her how his foot-powered lathe worked and how he determined the size of cuts he made on a chair leg.
I purchased two of Glen Huey's books and stopped to get him to sign them on the way out. He is a great guy and he shared a lot of information with me throughout the time we shared there.
After that, I went to get my walnut picture frame so we could leave. Did I mention it took a second place ribbon? With frame in hand, we turned to leave and there was Frank Klausz at his booth by himself. I had not had the chance to meet or talk to him, but that was about to change! We made eye contact, so I walked over, introduced myself and my wife, and asked if he recognized the project. He began to tell us the story of his son and how he was the one that came up with it. He did his thesis at Harvard on cutting coves on the tablesaw. This later lead to his acceptance into the Wharton School.
Anyway, here's the cool part -- he talked about how nice my finish work was and how much he liked it. He said he spoke earlier to a couple of the other gallery submitters and told them to go touch my frame because they needed to see and feel how a proper finish should be done!!!
Now folks, I gotta tell you... the coolest thing was that my wife was standing right there and heard everything he said. I thanked Frank for the kind words and we said our goodbyes. On the way out, my head was spinning. I asked Sherri to look and see if my feet were really touching the floor!!!
>did/does your wife realize who FK is, not in name but in status? Might not be the Great Bambino, but surely equal to M.Mantle, R. Marris, W. Ford, : ' >.
Congrats on the compliments, I'd be floating on air myself, also.
>Thanks, Joe. The finish is a simple one. It's just many applications of Watco Danish oil, rubbed in with 600-grit wet-dry paper. I topped it off with a coat of paste wax. Before I took it to the show, I removed it from the wall in our den and cleaned the dust off and gave it a new coat of wax and buffed it. Doing the Watco the way I do on open pore woods like walnut tends to fill the pores with the oil and dust slurry that's created. This really gives the wood a smooth-as-glass feel when done.
>Yes, Dale, at least I think she has a good sense of his standing in the woodworking community. I've brought his name up from time to time and explained his importance to woodworking.
>Frank was right. I couldn't help touching your frame myself even though I usually try not to touch. For those that didn't get a chance to see it in person, it is extremely well executed. The joinery and finish are perfect.
It was nice meeting you on Saturday. Sorry I had to cut our chat short, but I had a deadline getting home. I wound up barely making it.
Watching Franks show was definitely the highlight of the show itself. When I first got there I was disappointed. There were fewer vendors than the DC area shows I've been to in the past. I was hoping to see some newer equipment, but it wasn't there. Once I saw Franks first seminar, I decided the 2 hr. drive was worth it. After hanging around Glen Hueys boot and seeing a repeat performance by FK, with some extras that I requested, I thought it was the best show I've been to. Both guys very approachable, helpful, friendly, and funny.
The icing on the cake was to meet you and see Mike again.
>Congratulations on the kind words from FK. I�ve seen some of your projects and I�m not that surprised at his response. I didn�t get a chance to get to the show, my wife had some surgery and I had to work Saturday. How was the show? Most of the people who had been to the show that came by the store afterward said it was a bit disappointing. Good turnout of people, not a good turnout of vendors. What are your thoughts?
I know of no other craft/art/hobby where the top people are so aproachable, freely sharing of their expertise and so willng to praise the up-and-comers.
Jay, it was my equal pleasure to finally meet you too and put a face to a name.
I really enjoyed spending some time watching and talking with Glen Huey Friday and Saturday. He's quite a guy.
Then there's Frank. Well, I'm still playing our conversation over and over in my head. It was quite a revealing look at a man who is so very proud of his son and has done so much for woodworking.
Thank you for the kind words. A lot of what I know and do is the result of hanging out here at WoodCentral. There's a wealth of knowledge here and all one has to do is take it and run with it.
Speaking of that, I'll be looking for your project in Shop Shots whenever you get it done. I know your shop time is short but sooner or later you'll get 'er done! Don't forget to take some photos as you go along. That maple will make some pretty doors!
>If he had something in the way of constructive criticizm, you would have gotten that too. If he has a good word to say, he will say it. Not gratuitously, genuinely. Nice fellow to all. Will always give a wave to folks he knows even when doing a seminar. Not only a master, but a true gentleman.
Getting the praise from a person like Frank with your wife right there must have made you feel really great. After all, to be a hero in Frank's eyes is one thing, but to be a hero in your wife's eyes - that is special. Congratulations.
I spoke to Ray at the show and asked him who was minding the store. He said you were working Saturday. Sorry you couldn't make it to the show.
Yeah, the vendor turnout was a little on the light side compared to other WoodWorks shows I've been to. I think that will change a little in the future if they decide to do a Richmond show next year. However, the real strength of WoodWorks is their commitment to education and the list of talented and notable craftsmen for the on-floor demos and the seminars is outstanding. That's the difference between WoodWorks and the rest of the pack.
With the changes at The Woodworking Shows, I don't expect to see them continue in the same fashion that they have in the past. Their past emphasis has been on vendor participation and the sales that generates. They've missed the boat when it comes to educating and, quite frankly, haven't shown that they care much about it. Times and what people's wants are changing. Tools and machinery is all too available from many more sources these days at pretty good prices. The days of finding big deals on tools at these shows is becoming a thing of the past because of that fact. So, there needs to be something else to draw woodworkers to these things and that's where I think the WoodWorks show excels - education.
The new spin-off show - The Woodworking Expo looks doomed already. They've already canceled two of the next three shows. I wouldn't look for this one to survive long.
So, that about leaves one strong venue for woodworking shows - WoodWorks. Jonathan Frank said their seminar enrollments at this show were very good. That says something, I think. With the strong cast of talent WoodWorks offers, if attendance numbers are strong enough because of it, I'd think more vendors will want to take advantage of those numbers and participate too.
That's my take on it. I guess we'll see what happens. I'm just glad someone like Jonathan decided to stick his neck out and try something different. He really runs a first class show!
Are you referring to Johnathan Franks? He used to arrange the old American Woodworker shows down in Fort Washington, PA. He does a fantastic job. We have not had a really good woodworker show up here since then as far as I know..
>I thought the vendor turnout was poor. I loved the show thanks to FK and others. I did want to lay my hands on some equipment, but this show had little of what I wanted to see. If it wasn't for the excellent demonstrators, I would've been gone in an hour. I know this because I got there at 10 and FK wasn't on until after 11. I was considering leaving, but decided to stay for his show since I had driven 2 hrs. Then I checked out Glen, Mike, and Frank again and didn't leave until 3.
I've bought a lot of my major equipment at shows where I can compare the stuff. There were a couple possibile purchases for this show, but none of the equipment I was considering was on display. The Lee Valley booth was good and did help decide a future purchase or two between items in their catalog.
>Dan, yes, Jonathan Frank did the old AW shows before starting WoodWorks. If it's not too much of a drive for you, the next show is in York, PA - November 9-11.
Normally with walnut all I do is start with a heavy coat of the clear Watco (I like the natural but any of the colored Watco oils work the same). Let it soak in for about 10 minutes before starting the elbow grease. I rub with the wet/dry paper, keeping the surface wet with additional oil if needed. Actually, I begin with a 320 wet/dry paper. After a bit of rubbing, the slurry that's formed from the oil and wood dust starts to thicken. Once I've got it to this stage over the entire surface, I gently wipe off the excess and leave it for the next day.
The next day I start the process again but don't flood the wood with the oil this time. I apply a liberal coat with a foam brush or paper towel and then start the rubbing again with the 320 paper. When the slurry thickens again, I wipe off the excess and let it sit until the next day.
Next, I begin by wiping on a thin film of the Watco and rub with 600 wet/dry. Once the entire surface is rubbed, I gently wipe away any excess. From here I decide if I need to repeat the last process depending on how smooth the wood feels. If it feels good, I stop and let it dry for several days. If it doesn't feel right, I give it another rubbing with the oil and 600 grit.
Once the oil feels dry to me, I apply a coat of paste wax and follow with a good buffing. Most of the slurry created by the rubbing remains in the pores, which helps fill them and is what makes the final finish feel glass smooth. You'll get a good workout doing this but the results are worth it. This works equally well on cherry and mahogany too. When you don't need a film finish and a close-to-the-wood oil finish will work, this is a great way to go. Give it a try and see what you think. Oh, and remember to dispose of any oily rags or paper towels properly to prevent a fire from spontaneous combustion!
>He did a good job on those old AW shows. Nice guy. Do not know about the York show. I may be having a wedding shower party at my house and I do all the cooking..... DUH! York is about a 2 hour drive, i think, from Bethlehem.
Did you know the AAW (American Association of Woodturners) annual meeting is coming to Richmond next June? Big show. I know you haven't been doing much turning, but just in case you're interested.
Ha, it a little difficult to do ANY turning without a lathe. Then there the matter of learning how? One day I plan to take that slippery slope but not before I get into a bigger shop.