Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Water spot in Finish

Posts

Water spot in Finish

#1

Water spot in Finish

Craig in SIlverdale

>A friend has a dresser on which she placed a potted plant. The dish under it leaked and water absorbed under the finish. I know this has been covered before, I just can't seem to find it. What is the best way to remove that haze spot? The dresser was mfg. in the 50's, and i believe the finish is varnish. I don't claim to know how to repair damaged furniture, so any advise will be greatly accepted.

Re: Water spot in Finish

#2

Damp - not wet

David Yoho

>As per Michael Dresdner -

Dampen a cloth with denatured alcohol and wipe the area once or twice with it. The white marks will come out immediately. Repeat if necessary to get them all the way out. The cloth should be damp, but not wet, which means "about as wet as a healthy dog's nose." This method is also safe for shellac, due to the limited amount of alcohol being used.

I've used this trick several times and it works!

David

Re: Water spot in Finish

#3

Re: Damp - not wet

Steve Schoene

>By the way, if this came from a factory in that time period, its finish is almost certainly nitrocellulose lacquer. The solution given with the swipes of alcohol is generally the best.