Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Freud 3 1/4 HP Router question

Posts

Freud 3 1/4 HP Router question

#1

Freud 3 1/4 HP Router question

Stuart Hough

>Anyone have any experience with Freud's 3 1/4 hp router? What did you think of it? Did it run smoothly? any vibration at certain rpm? Did it ho;d up well to use? Thanx for any feedback!

Re: Freud 3 1/4 HP Router question

#2

Re: Freud 3 1/4 HP Router question

Bill Schreiber, Litchfield, NH

>I have had mine for 6 years now and am very happy with it. It is big, it is heavy for hand use so probably want to use it mostly in a table. I like the dust collection on it.

It makes a lot of noise (don't they all?) and as for vibration, not any worse than most.

As for holding up, I am a hobbyist type and probably it has 50-100 hours of total use on it during that time. No problems, but not much use either.

Regards,

Bill

Re: Freud 3 1/4 HP Router question

#3

Re: Freud 3 1/4 HP Router question

Glenn Madsen near San Francisco

>My response would be the same. It was my first router, and it scared the heck out of me. I built it a table, and have used it a bunch. I have several Porter Cables of various sizes for hand held applications. I'll keep the Freud, however, for the table. It's more than paid for, and more than I need.

There is some question that the Freud changes over time, that new models and old may differ in their point of manufacture, and in their strength of design. Look closely at what you're offered. Some of the manufacturers have quite a variance in their products.

Re: Freud 3 1/4 HP Router question

#4

Re: Freud 3 1/4 HP Router question

knotscott

>I had an FT2000E for ~ 4 years. It ran strong and never gave me any problems. If the price is right, it's a good value IMHO. My biggest complaint was that the throat opening on the FT2000E was too small to accommodate big 3" bits.

That said, I much prefer the above table features of the smaller 13 amp FT1700 and even the 15 amp Milwaukee 5625.

Re: Freud 3 1/4 HP Router question

#5

Re: Freud 3 1/4 HP Router question

Charles M

>Freud routers have undergone minor changes/improvements over the years but they have always been made in the same factory in Spain to the same quality level.

Charles M

Freud America, Inc.