Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Slightly OT: Floor finish matching. Kind of long.

Posts

Slightly OT: Floor finish matching. Kind of long.

#1

Slightly OT: Floor finish matching. Kind of long.

Eric Kuehne

>I have a serious problem with a hardwood floor. We have pulled up a small platform in a room and now need to weave some new red oak flooring into the existing part. I did this successfully last year in a bathroom where the floor never gets any sun. My current problem is that 25 years of exposure to morning sun have given the other floor a distinct yellow cast and the other stain doesn't come close to matching.

I have procured some new stain that is pretty close to what I think I need (Varathane Golden Pecan gel)but still need to get it to yellow a bit more. I know that varnish may help but I'm also considering a water base yellow dye as part of the finish protocol. My hope is that as the dye fades patina will compensate. Amongst my questions is whether to add dye before or after stain.

Any advice would be greatly appreciated. BTW mixing board is not an option as they are slightly different geometries and it is WAY to much of a PITA to try and match them that way.

Eric in Los Gatos

Re: Slightly OT: Floor finish matching. Kind of long.

#2

Dye first

Michael Dresdner

>Dye always goes on first, and only on raw wood. Be aware, though, that if the yellow dye is a waterbased one it will alter the way the wood takes the pigmented stain. Make sure you do samples first.

Re: Slightly OT: Floor finish matching. Kind of long.

#3

Re: Dye first

Eric Kuehne

>Thanks, Micheal. I tried a sample last night and it actually appears that just the yellow dye gives me a good color match. I'll have to see what it looks like with varnish but I think it will tint the color in the right direction.

Thanks for the advice.

Eric in Los Gatos