Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Source for high-pressure laminate??

Posts

Source for high-pressure laminate??

#1

Source for high-pressure laminate??

Pieter B. Ruiter

>I have searched high and low for high-pressure laminate - the kind of "formica" that is actually super glossy and looks more like smooth plastic. I'd need just a sheet (4x8 or 5x5), two at most, not in bulk...

Any suggestions would be most appreciated. Thanks!

Pieter

Re: Source for high-pressure laminate??

#2

Re: Source for high-pressure laminate??

Dan Mitchell

>I recently bought a sheet off the shelf at Home Depot for a TS outfeed table. $45. Typical finish, white in color, fine for my use. What they have in stock is limited, but they have hundreds of styles/surfaces they can order, no doubt the same is true of Lowes, your local lumber yard, counter top place, etc. Expect to pay more for such a special order.

Dan

Re: Source for high-pressure laminate??

#3

Re: Source for high-pressure laminate??

John McGaw

>Yep. Either variety of borg will have a limited selection of laminates on hand. Luckily for me a sort of off-white seems to be standard everywhere and it works nicely for shop fixtures, tables, and the like. Of course if there was some need to obtain exactly the right sort of laminate to fit a specification there are always suppliers to cabinet shops. Sadly most of these are wholesale-only but even if you can't buy directly it usually is possible to find someone who can buy what you want and pass it on at a small markup (or even just a six-pack).

Re: Source for high-pressure laminate??

#4

CLARIFICATION: Source for high-pressure laminate??

Pieter B. Ruiter

>Ahh - but the borgs don't sell the high-pressure variety (I checked, and I asked) - just the MEDIUM version, (called Formica)... I've once seen much higher density laminate on some laboratory tables and some custom casing, and it really differs from the material Lowes/HD sells.

Special order may be an option - I was hoping for a regular source to order some, say in half or quarter sheets ideally.

p

Re: Source for high-pressure laminate??

#5

Hope this will help you.

John Cotten

>There are basically two different grades of laminate. Vertical and horizontal. Vertical grade is used on post-formed countertops because it will make the bends required. Horizontal grade is much thicker, it is what a custom top maker will use on the horizontal tops for kitchens, labs, etc.

As I have mentioned before, stop by a cabinet shop or top shop. They usually have some scraps or bad sheet they will sell cheap or even give away.

If you are looking for Melemine (film laminated MDF) This is the white material you usually see in DR.s offices, or other office buildings. I just bought a lift a couple of weeks ago, was around 20.00 a sheet for 3/4 stock.

Ask locally at your neighborhood cabinet shop, they will usually tell you where they are buying their sheet goods.

If you are close to Danville,KY, call me at 859-583-7881 and I'll help you get what you are looking for.

Re: Source for high-pressure laminate??

#6

Re: Source for high-pressure laminate??

Mark Mandell - Gone Round In Jersey

>What you are looking for is "horizontal counter grade", most of what the Borgs sell is vertical grade; much thinner.

You should look for hard surface and cabinet-making supply houses in your area. Or you can Google "Formica" and "Wilsonart" and then search their sites for dealers near you.

You may find the stuff on the NET but the heavy grades don't bend well, and the shipping of a single 4x8 (48-1/2x96-1/2) sheet (minimum orders will apply) will wreck you.

You will find solid colors in the high gloss finish, but that is very different from the very special "lab grade" material that is used in, um, laboratories. Don't ask for lab grade material unless that is what you want and are prepared to pay for.

mm

Re: Source for high-pressure laminate??

#7

Thank you: Source for high-pressure laminate??

Pieter B. Ruiter

>You know the word for something, and a whole world opens up! Horizontal grade... exactly what I was looking for! Thank you all so much. This will help me along in a big way.

p

Re: Source for high-pressure laminate??

#8

Re: Source for high-pressure laminate?? *LINK*

Jim Dillon

>Pieter,

I've had good service and competitive pricing from CabinetParts (link below)for the WilsonArt brand of laminate. While they don't appear to offer the horizontal-grade (thicker stuff) in every color, it seems to be about $10 more per 4 x 8 sheet. Don't know if this will help you, but it might be worth a call to make sure you are getting what you want. BTW, I've always used the term high-pressure laminate to refer to laminates in general because AFAIK they are all made the same, except the horizontal-grade is thicker and intended for horizontal surfaces like countertops that take a beating. Hope this helps. Good luck.

Jim


Cabinet Parts

Re: Source for high-pressure laminate??

#9

Addendum

Jim Dillon

>Mark raised the issue of shipping costs. It has been too long for me to remember the shipping cost for 5 sheets of 4x8 horizontal grade laminate, but I don't remember it being outlandish - at least 5 years ago. And all 5 sheets were rolled up in a cardboard box roughly 18 inches square by 4 feet long and came by UPS. However, they must use a machine of some sort to roll and metal-band them; watch out when you cut the metal band 8-). I only have experience with this one supplier though.

Jim