Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

settee design

Posts

settee design

#1

settee design

Dean Lapinel

>I have spent some time studying old designs for settee style seats and they all have a mid section support for this two seater. Lately I have been seeing Maloof inspired settee furniture with no apron and no middle leg. I'm not an engineer but this style of design just seems to beg for a break in one of the front two joints when you get two ...ummm...hefty people sitting on this seat.

My favorite is by an awesome craftman, Robert Erickson

(I don't know him, just admire his work)

http://www.ericksonwoodworking.com/detail/st-paul-settee.html

I prefer to just list his link rather than his photo (without permission).

I would like to design something with a different look but I'm afraid of the strength of the seat.

Any comments?

Re: settee design

#2

JL

Re: settee design

JL

>I'm starting a Windsor style settee now. I won't have an apron, but I am planning on middle legs and stretchers.

I'm making my seat out of 9/4 cypress and I'm running the boards the length of the seat. By the time I finish the seat, it'll be maybe 1 1/4" thick in the deepest part of the seat bowls.

That being said, I think that if you support the middle of your seat in some fashion (such as the back leg in the Erickson design), I think you can go fairly thin if you use a "strong" wood (such as hickory). I don't know if I'd go much thinner than 1" at any one spot though.

If you bevel the front edges to a "line" that's about 1/4" wide, it looks a lot thinner than it really is. That's one way of disguising the actual thickness of the seat. I've done a few chair seats that way and I haven't lost an edge yet.

Re: settee design

#3

Re: settee design

Dean Lapinel

>Thanks for your note. I think I'm going to do a compromise design of my own (blend traditional with maloof style).