Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

best material selection

Posts

best material selection

#1

best material selection

Earl Rogers

>I am building a wall that will consist of approximately 14 1x10 x8 standing on end. the boards will be set at a 45 deg angle so that you can not see through the wall from one end and can see through the other end. something like this / / / / / /. The wall will be 7ft tall. I do not plan to block at mid height. I want smooth finish on sides and edge.

What would the best selection of wood product. MDF, dimension or plywood.

Re: best material selection

#2

Re: best material selection

Clint Searl, at the base of Haycock Mtn

>It'll be pricey, but the easiest and best would be 1x10 (actually 1x9.5) finger jointed poplar trim boards. Even pricier would be Azek trim boards.

Clint

Re: best material selection

#3

Re: best material selection

Barry Irby

>I might be wrong, but I would be leery of MDF unless you hang it from the top. It tends to sag over time. I probably would use plywood, but I am not familiar with the material Clint mentioned.

Re: best material selection

#4

Re: best material selection

JohnKJordan in East TN

>This is an interior wall?

I'd worry about 7' long solid wood boards warping if supported only on the very ends.

JKJ