Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

the angle

Posts

the angle

#1

the angle

Guy P. Boucher

>What is the angle on a 6-sided window

Re: the angle

#2

Re: the angle

Charles

>The interior angels of a hexagon are 120 degrees each. The exterior angles or the cut angle are 60 degrees.

Re: the angle

#3

Re: the angle

Guy P. Boucher

>Thank you Charles.

Re: the angle

#4

60*

Mark Mandell - Gone Round In Jersey

>

Re: the angle

#6

I think I made a mistake!

Charles

>Depending on how you orient the wood, you will most likely need to make a 30 degree cut.

Re: the angle

#7

Re: Cuts

Mark Mandell - Gone Round In Jersey

>If you are mitering flat stock to make a hexagon, your blade should be tilted precisely at 30*.

For ripping a bevel, you should also consider setting your TS fence so that the workpiece is above the tilted blade and riding on the fence. For right-tilt saws this means moving the fence to the left side of the blade. Otherwise use the miter guage or a cut-off sled to control the workpiece.

For a chop saw this is a no-brainer. The angle is 60* so you cut each piece at 1/2 the angle - 30* to make the 60* miter.

mm

Re: the angle

#8

Blade angle = [180�/(number of sides)]

Andrew F in Australia

>eg: to cut a square sided box, blade angle = 180/4 = 45�

to cut a pentagonal box, blade angle = 180/5 = 36�

to cut a hexagonal box, blade angle = 180/6 = 30�

to cut a septagonal box, blade angle = 180/7 = 25.7�

Cheers,

Andrew

Re: the angle

#9

Re: the angle

Guy Boucher

>Thanks all for your help. I love this new place I have found for us want to be workers. So much great information and so many great people.

Thanks again

Re: the angle

#10

Phew!

Charles

>I hope you didn't cut anything based on my first answer! Glad you got a better answer.