Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Lean to shed plans

Posts

Lean to shed plans

#1

Lean to shed plans

Charles Sharp

>My brother has asked me to build him a Lean To type shed about 8' wide and 20' long. The high part of the roof will be on one side and the doors will be on one end.

Since he lives in So. Cal., NO Snow, some rain and some wind. It will go on top of and existing cement slab.

I'm looking for some free plans that I can modify to fit his needs.

Re: Lean to shed plans

#2

Do you really need plans?

Craig in Silverdale

>You have the size, the style, and you know where you want the door. All you really need is to determine how high you want the back wall and the slope of the shed roof. Sounds as if you have the plan in your head, you just need to put in the dimensions. Have fun building it.

Remember, anything you can't see from the road, doesn't require a permit.

Re: Lean to shed plans

#3

Re: Lean to shed plans

Joseph Mulherin

>Charles, the first thing I do with any project is to make a rough drawing of it using my measurements and then modifying it as I foresee from the drawing. Mistakes can be erased easier and cheaper than in the field and wasted materials. Just remember...the walls are 16"oc and the roof rafters are 24"oc. Door jamb is double 2/4s and lintle should be 2x6. Use 5/8" T&G for the roof, use 90lb roofing rolls, and nail properly. just suggestions.... make the rough drawing first....

Re: Lean to shed plans

#4

Re: Lean to shed plans

JohnKJordan in East TN

>This is my favorite book on building such things. It has rough plans on a variety of buildings, but more importantly provides good general construction techniques. Search Amazon:

How to Build Small Barns & Outbuildings by Monte Burch

JKJ