Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Mahogany spoon

Posts

Mahogany spoon

#1

Mahogany spoon

Mike Schwing from Maryland

>This is a new design for me. Way off my typical fanciful designs. Might have been influenced by Ellis' "functional" discussion, but I still doubt this would ever be used by anyone for anything other than decoration. About 9" long. Funny, I figured it would take me less time to make a smaller version with no crazy curves, but it wound up taking longer as I think my brain wants my hands to go off in other directions. I had to force myself to stick to my drawing in order to complete the design. Don't know if this'll sell or not. Comments welcomed and thanks for looking. Mike


img

Re: Mahogany spoon

#2

Re: Mahogany spoon

Keith Newton

>I am not sure it is still a spoon at that size. Maybe a scoop. I like it though. Did you do all of the hollowing with that ball end bit that you posted the other day? If so, how big is that thing, and what tool do you mount it into?

Re: Mahogany spoon

#3

scoop works!

Mike Schwing from Maryland

>Thanks Keith. Yes, most of the hollowing is done with that same 1/2" carbide ball bit. It fits into a Foredom flexshaft machine. I also use smaller ball bits to get into diameters where that 1/2" ball won't fit. And a flame shaped bit or two.

Re: Mahogany spoon

#4

Norm Sartorius spoons?

Craig

>Looks to be more in line with the work he does. Check his available work page to get an idea of what these things can sell for.

Craig

http://www.normsartorius.com

Re: Mahogany spoon

#5

Re: Norm Sartorius spoons?

Mike Schwing from Maryland

>Norm and I have spoken many times in fact about our work. He is credited as my inspiration, along with Barry Gordon, in a spoon making article I wrote for Woodcraft mag a few years ago.

Re: Mahogany spoon

#6

Have you tried these? *LINK*

Keith Newton

>Rotary Chisel, form Creative Technologies?

If not, you should give them a try. The design is really good. They cut nice and clean without having much tendency to climb. some of the larger ones in a die-grinder will really fly through that kind of work with little effort.


http://www.rotarychisel.com/info.html

Re: Mahogany spoon

#7

Re: Have you tried these?

Mike Schwing from Maryland

>I have not tried them Keith. They look interesting. If you want me to evaluate one for you, I'll send you my address!

Re: Mahogany spoon

#8

Sorry, I am using them too much

Keith Newton

>to let them go. They are kind of pricey aren't they. I have one which is mounted in a long-neck die-grinder that I got from HF, and the cutter cost more than the grinder.

I also have a small one which I use in a Dremel that I like a lot.

I am a pit pressed for time right now, because of a new show opening November 1st. but we need to discuss sanding details sometime. I have been experiment, and have come up with some tricks that are working great , Fast, easy, cheap, versatile, and would be good for fairing and finishing the inside of the scoop, spoons, etc. but you may already have something that works well for that.:

Re: Mahogany spoon

#9

Be happy to have that conversation!

Mike Schwing from Maryland

>Thanks Keith. I'm amazed at the work you do, and would be happy to discuss any such methods with you. I have recently come up with a sanding idea of my own but no product to match it. A while back I found something that is 95% the answer to my prayers, the interiors of my carvings are now as nicely finished as the exteriors. That is something I had struggled with until the discovery. Good luck with your new endeavor.